What's New Unreplied Topics Membership About Us Contact Us Privacy Policy
[Ad]

Pasteurization of chilli sauce

Started by , Nov 07 2017 01:20 AM
3 Replies

We want to pasteurize chillies sauces that will be stored at ambient temperatures. It is preservative free and will be packed in plastic bags. We want to retort or pasteurize the product to get to 12 to 24 months shelf life. 

We have the following questions:

1) At what temperature and time would we have to pasteurize to achieve this?
2) How quick should the product be cooled after pazteurization?
3) Could we achieve a shelf life of more than 24 months? 
4) What processing aids could be used to help?
5) Have any studies been done on this and what were the results?
6) Can this also be done with preservatives (sodium benzoate)and be stored at ambient temperatures and get 24 months shelf life?

Share this Topic
Topics you might be interested in
Where can I find the Z and D values for E. coli O157 in apple juice during pasteurization at temperatures between 71 and 75°C? Validation of pasteurization process Ice cream mix pasteurization failure corrective action Is pasteurization always a CCP? Changing from Hot Fill to Tunnel Pasteurization
[Ad]

If this is sold in the US, you can only use pasteurization if the final pH of your product is below 4.6 (this would be an "acidified food"), otherwise you will need to retort and file a process as a "low-acid food".'

 

I highly recommend contacting a "process authority" to help you develop the controls needed to make this food safe first, then work on the shelf life you require.

If this is sold in the US, you can only use pasteurization if the final pH of your product is below 4.6 (this would be an "acidified food"), otherwise you will need to retort and file a process as a "low-acid food".'

 

I highly recommend contacting a "process authority" to help you develop the controls needed to make this food safe first, then work on the shelf life you require.

Totally agree. A lot depends on the precise composition of your food product. No matter what you decide upon, it will need to be validated. There are companies who provide services to determine the best way to set up a process.

 

Martha

Have you considered using Nitrogen as part of your packaging process?

let me know if you would like more information about how you can produce nitrogen at very little cost with a N2 Generator from South-Tek Systems

jjeffries@southteksystems.com

 http://www.southteksystems.com/


Similar Discussion Topics
Where can I find the Z and D values for E. coli O157 in apple juice during pasteurization at temperatures between 71 and 75°C? Validation of pasteurization process Ice cream mix pasteurization failure corrective action Is pasteurization always a CCP? Changing from Hot Fill to Tunnel Pasteurization Pasteurization Procedure for Tom Yum Paste Pasteurization values equivalent to sterillization at 121oC for 3 mins CCP Validation - Pasteurization temperature Is cool storage of fruits and vegetables before Pasteurization a CCP? Hot Fill vs. Tunnel Pasteurization