BRC issue 5- Section 5

Question

BRC issue 5- Section 5

Started by dugaucher, Oct 20 2019 11:39 PM

Reply to this Topic

dugaucher

IFSQN Associate

5 Replies

20 October 2019 - 11:39 PM

Hi firends,

We are a small packaging company and are currently implementing BRC issue 5. I know issue 6 is at the corner but senior management has been pushing.

All is written but I am stuck at Section 5: PRODUCT AND PROCESS CONTROL. Could you help me with procedure templates for this sections.

If you care to share or direct me, I would really appreciate.

Thank you

Dugaucher

Share this Topic

Topics you might be interested in

Key Requirements in BRCGS Packaging Issue 7 What’s New in BRCGS Global Standard Packaging Materials Issue 7? Assessment for Production Risk Zones based on Clause 4.3.1 of BRC Issue 9 BRC Issue 8 interpretation guidelines Courses Needed for BRCGS Issue 9 Non-Conformance

Reply to this Topic

Similar Discussion Topics

Key Requirements in BRCGS Packaging Issue 7 What’s New in BRCGS Global Standard Packaging Materials Issue 7? Assessment for Production Risk Zones based on Clause 4.3.1 of BRC Issue 9 BRC Issue 8 interpretation guidelines Courses Needed for BRCGS Issue 9 Non-Conformance Hair and Beard Covering Risk Analysis for Packaging Facilities (BRCGS Issue 7) Summary of Key Changes in BRCGS Issue 7 vs. Issue 6 Where to Find Section 403(i)(2) of the FD&C Act and How It Relates to Labeling Requirements How to Declare Outsourced Processes Under BRCGS Issue 7 FSSC 22000 Additional Requirements Version 6 Section 2.5.11

GMO IFSQN Fellow · Answer 1 · 2019-10-21T07:01:33+00:00

Hi, SFC, I don't have a lot of experience auditing packaging sites, perhaps you can give more detail on an example clause you need help with?

dugaucher IFSQN Associate · Answer 2 · 2019-10-21T11:14:12+00:00

Thks GMO

5.2.1
The site shall have a documented artwork management procedure covering the activities for which the
site has responsibility. This may include, but is not limited to:
• collation of information to be included into artwork
• receipt of artwork files from the customer
• verification of completed artwork and approval by the customer.

GMO IFSQN Fellow · Answer 3 · 2019-10-21T11:36:54+00:00

So I'd write a procedure, name it, have who is responsible for ensuring compliance at the top, a scope, e.g. "To ensure artwork is produced to the customer requirements and is compliant with applicable legislation." Then I'd break it down section by section on what you do (or should do) to ensure compliance.