What's New Unreplied Topics Membership About Us Contact Us Privacy Policy
[Ad]

Non-permanent Boardmarker for colored tags?

Started by , Aug 05 2016 01:43 AM
6 Replies

Dear All,

 

We are a canned tuna food manufacturer here in Indonesia. As part of our traceability system, we have implemented a batch tracking system

 

which involves every 30 minutes changing of colored tag (a plastic plate-like colored tag) in the line. The skinned and cleaned tuna loins are

 

placed in a plastic square tray together with the colored tag where a non-permanent boardmarker is used to write the details of the batch.

 

Since we are only buying in retail and cannot get the complete specification,  so far in our research the marker that we are using according to

 

it's specification is that it is xylene and toluene free and uses alcohol based pigment. Now that we are reviewing our Hazard Analysis we have

 

considered it as a possible hazard (chemical) however little is our knowledge on what is it's effects if it comes in contact with the loins. Given

 

the specs, is it ok that we continue using such marker? Is there any requirement/regulation/specification in using such marker?

 

Many thanks and Best Regards,

 

Joven

Share this Topic
Topics you might be interested in
Trader Joe’s dumplings recall due to possible contamination with hard plastic from a permanent marker Shellfish Tags - Shellstock - Record Keeping - Lost or Missing Tags CIP tags for Jumpers Permanent Food Grade Marker for direct food contact surface? How to structure and create lot tags?
[Ad]

Hi Joven,

 

There is no legislation which would cover whether you can use a certain marker, but you are right in thinking about adding this to your HACCP - I would just check you have the right procedures/ checks in place to cover any damages with the pens etc.

 

I am not sure of your HACCP system/ process but is there any risk of the marker material being in direct contact with loins and also is there any further heat treatment/ processing which could cause any issues with seepage from the marker when added to tag.

 

Regards

 

Chris 

1 Thank

Dear beadle,

 

Thanks you for such good inputs. Will put this in mind. May I just ask, if do you happen to know if there are brand/s of marker that are branded as safe to use for food

 

contact surfaces? 

 

Thanks and Best Regards,

 

Joven

Hi Joven,

Having looked it may sound silly but there are cake decorating markers that can be used which are for food!

http://www.foodoodle...ssorted-colors/

So this may be your best bet, and they are cheap!

Can be kosher certified also and used on cakes etc.

Hope this helps ?

Regards

Chris
1 Thank

Dear Chris,

 

Not silly at all! I honestly find it helpful. Thank you for the inputs!

 

Best Regards,

 

Joven

Hi Joven,

 

Good work identifying the hazard from the marker ink.  An alternative to using the cake markers would be to put each tag inside a snap-lock food bag (low density polyethylene).  This will protect the tuna from the ink and also stop the ink rubbing off. 

Karen

1 Thank

Hi Karen,

 

Thanks for another insightful input!Will definitely recommend this to our Food Safety Team.

 

Best Regards,

 

Joven


Similar Discussion Topics
Trader Joe’s dumplings recall due to possible contamination with hard plastic from a permanent marker Shellfish Tags - Shellstock - Record Keeping - Lost or Missing Tags CIP tags for Jumpers Permanent Food Grade Marker for direct food contact surface? How to structure and create lot tags? Company to make customized hold tags Bulk Tote Identification Tags Out of colored hair nets. Need ideas. Logbook for colored detectable plasters Sanitary Design Ideas - Permanent Guides on a Plastic Table