Should I consider roasting as CCP?
My company produces multigrain product, which is mixture of grain and beans and we do have one process which is roasting for bean. However we only use 110C and 40mins for roasting and our purpose is to remove the rancidness of the bean. If I consider this as CCP, this temperature is not enough to remove aflatoxin and I worried this might rise a findings for auditor. Anyone can give suggestion about this? Is it necessary to involve roasting as CCP?
My company produces multigrain product, which is mixture of grain and beans and we do have one process which is roasting for bean. However we only use 110C and 40mins for roasting and our purpose is to remove the rancidness of the bean. If I consider this as CCP, this temperature is not enough to remove aflatoxin and I worried this might rise a findings for auditor. Anyone can give suggestion about this? Is it necessary to involve roasting as CCP?
Hi kuohao,
afaik rancidness, per se, is not regarded as a (haccp) safety hazard so it's removal is unrelated to a possible CCP.
Are you sure the roasting has no other objectives, eg removal of microbial hazards ?
It might help remove microbial, but how about aflatoxin,do I need to give justification why this temperature 110C is used? As aflatoxin is heat resistant, I dont think 110C can denature aflatoxin, if I just say this temperature help remove microbial is it enough? As I scare too high temperature will burnt the bean
It might help remove microbial, but how about aflatoxin,do I need to give justification why this temperature 110C is used? As aflatoxin is heat resistant, I dont think 110C can denature aflatoxin, if I just say this temperature help remove microbial is it enough? As I scare too high temperature will burnt the bean
Hi kuohao,
I suggest you investigate the reason for roasting, Beans not my area of expertise but roasting is commonly used to remove pathogens in nuts, etc.
As you say, probably no effect on aflatoxin which if a significant hazard presumably demands other controls.
If there is a food safety risk related to toxin level, and it cannot be removed by a process step, it should be controlled as a raw material requirement. Meaning your supplier needs to ensure there is no risk of high toxin levels, e.g. by preventing mould growth in the harvest and storage.
I know some people may suggest that toxins can removed by radiation/fumigation or othere processed - I have little expereience in this field but remember that some of these processes must be declarated when selling the product (depending on legal requirements in the final market).
Typically the aflatoxin and mycotoxin levels are reported on a COA by the supplier of the bean or grain. I have seen this in the bakery industry where the company is purchasing bulk flour from a vendor. I would push requirement on the supplier verification program because the vendor is ultimately responsible for monitoring and ensuring mold growth is below or at an acceptable and safe level. The supplier of a bean would need to have a HACCP and it should include somewhere the mycotoxin and aflatoxin levels and what they have put in place to ensure a safe level and monitor it.
Roasting will kill mostly mold & main purpose of roasting is to enhance taste .
for aflatoxin control sorting of R.M is most important as only mould can be kiiled /or growth is inhibit during subsequents steps of process , but toxin once produced will be there , you have to go for quick checks (EG Neogen Detection Kit tests etc ) for aflatoxin level in R.M and Final product & take necessary corrective actions to reject /Discard the material.