Can such Visual HACCP Flowcharts be acceptable?
Hello, I run a gluten free foods company and we are preparing for FSSC 22000 currently. For HACCP, we have created flowcharts for a range of products, however, they are a bit different from your standard flowcharts since a lot of visualization has been used. I am attaching 2 photos below as an example, would these be acceptable? In your opinion, what disadvantages would it pose compared to traditional flowcharts and anything that auditors may be concerned with?
Attached Files
Hello, I run a gluten free foods company and we are preparing for FSSC 22000 currently. For HACCP, we have created flowcharts for a range of products, however, they are a bit different from your standard flowcharts since a lot of visualization has been used. I am attaching 2 photos below as an example, would these be acceptable? In your opinion, what disadvantages would it pose compared to traditional flowcharts and anything that auditors may be concerned with?
Hello,
IMO, these are a little too informative. I believe they would be acceptable, but I think it opens you up to unnecessary headaches for HACCP violations in the future. My USDA inspector would give us an NR if any part of that was not followed, or done differently then the flowchart states.
I go with what FSM4you said and add that as a former Auditor THESE WOULD open up a lot of rabbit holes to be run down that don't need to run down, leading to errors that were not intentional at time of creation - it looks very pretty, but Auditors are not looking for pretty.
I'd go the traditional route.
These seem more like a work instructions flow chart not a HACCP based flow chart. You should keep things simple and more general in the description of each processing step. As others have already stated this could be interpreted in a way that would lead to a NC during an audit.
An example: Mix ingredients --> Create dough --> Form dough balls --> Fry dough balls --? Etc...... Your risk assessment will also be catered and more clear for each step and change in the process.
I don't think there's anything wrong with making it pretty with the pictures, but if you were to review a few publicly searchable examples I think you'll see where you can make some improvements to your flow chart. Couple things I'm spotting right away:
- The receiving step does not include receiving packaging, nor does it specifically indicate where packaging is introduced into the flow.
- There is no step for storage of raw material or storage of finished goods (I do see a fridge/chiller step with the gulab, but that's prior to packaging so likely only applies to WIP material). The bread flow chart does not list the receiving step for any ingredients either.
- I speculate that there are some ambient temperature raw ingredients (oils, flours, etc.), and some that likely require refrigeration (eggs). I normally see flow charts differentiate between cold and ambient receiving and storage, both on the flow chart and hazard analysis.
- If creating either doughs requires water, I'm not seeing water as an input on the flow chart (which should also be included near the receiving part of the flow chart and listed on your HA).
- Bread flow chart does not indicate any CCP's (if there are none then never mind).
What purpose are you trying to make them pretty? Which audience? I'd stick to photos in procedures and science in the HACCP plans.
Those are work flows, not a HACCP flow diagram
K.I.S.S. is what you should follow for your flow chart
These seem more like a work instructions flow chart not a HACCP based flow chart. You should keep things simple and more general in the description of each processing step. As others have already stated this could be interpreted in a way that would lead to a NC during an audit.
An example: Mix ingredients --> Create dough --> Form dough balls --> Fry dough balls --? Etc...... Your risk assessment will also be catered and more clear for each step and change in the process.
Can you please elaborate on what would differentiate work instructions and haccp based flow charts? From my understanding, a HACCP based flow chart needs to include all steps involved and as others have stated, need not be so detailed but making it detailed should not take away from it being a HACCP flowchart.
TIA.
Those are work flows, not a HACCP flow diagram
K.I.S.S. is what you should follow for your flow chart
Why would they not qualify for being HACCP flow diagrams, anything missing?
Asking purely for my understanding, appreciate your response.
I don't think there's anything wrong with making it pretty with the pictures, but if you were to review a few publicly searchable examples I think you'll see where you can make some improvements to your flow chart. Couple things I'm spotting right away:
- The receiving step does not include receiving packaging, nor does it specifically indicate where packaging is introduced into the flow.
- There is no step for storage of raw material or storage of finished goods (I do see a fridge/chiller step with the gulab, but that's prior to packaging so likely only applies to WIP material). The bread flow chart does not list the receiving step for any ingredients either.
- I speculate that there are some ambient temperature raw ingredients (oils, flours, etc.), and some that likely require refrigeration (eggs). I normally see flow charts differentiate between cold and ambient receiving and storage, both on the flow chart and hazard analysis.
- If creating either doughs requires water, I'm not seeing water as an input on the flow chart (which should also be included near the receiving part of the flow chart and listed on your HA).
- Bread flow chart does not indicate any CCP's (if there are none then never mind).
Agreed on all points, I will work on those.
A question about the water point, wouldn't it fall under the same category of other raw material or is it necessary to list it separately? Asking generally rather than just in the context of the attached examples.
Agreed on all points, I will work on those.
A question about the water point, wouldn't it fall under the same category of other raw material or is it necessary to list it separately? Asking generally rather than just in the context of the attached examples.
Yes, normally any utilities should be listed separately. Your control measures on water are unlikely to be similar to other suppliers.
A question about the water point, wouldn't it fall under the same category of other raw material or is it necessary to list it separately? Asking generally rather than just in the context of the attached examples.
What GMO said. Unless you're bringing in the water on pallets from a water supplier, it's not receiving the benefit of inspection at receiving with COA's and a LoG to guarantee purity. The biological hazards for using water from your taps at the plant are addressed through monitoring in your EMP program, something not likely done for raw materials received via truck.