How often should a drain that has a plug in it be cleaned?
Started by KelseyLouis, Jul 26 2018 02:02 PM
How often should a drain that has a plug in it be cleaned? we are a dry blending facility and do not use the drains on a regular basis.
Limited equipment spacing around floor drain
Floor is not sloped to the drain getting constant overflow
Drain Sanitation Recommendations
Drain catch baskets
Drain foaming during production
[Ad]
Hi, Kelseylouis.
Have you sampled your drain for environmental monitoring? If you have this sampled for a certain duration and observed to be in poor condition and with detection for micro of concern, then it could be a good starting point that cleaning frequency must be shorter than the duration of the sampling period. Verify this frequency and if turned to be with detection, rectify possible causes and may shorten the duration between cleaning frequency.
It will be difficult to suggest given lack of information, but whatever data you may have (if any), you may optimize it to justify decision.
Limited equipment spacing around floor drain
Floor is not sloped to the drain getting constant overflow
Drain Sanitation Recommendations
Drain catch baskets
Drain foaming during production
Drain and Toilet Back-up Policy or Procedure
Does anyone know how often raw milk tankers must be cleaned?
Can face shields be cleaned, sanitised and then reused?
Are there any standards for Drain Vents in a food factory?
Feedback on a Drain Cleaning SSOP