Is it necessary to calibrate a new pressure gauge

Hi all:

We have just install a new pressure gauge, do we have to carry out calibration before use it?? In the event of calibration, what we details have to record down on our from about calibration matter ?

Hi all:

We have just install a new pressure gauge, do we have to carry out calibration before use it?? In the event of calibration, what we details have to record down on our from about calibration matter ?

Hello Carine,

I would give you my opinion on the matter, which may differ from other people's responses, depending on local regulations and even personal opinions.

If the pressure is a factor that can influence food safety and/or quality, then this pressure gage has to be calibrated at a certain frequency recommended by the manufacturer, and using the method described by the manufacturer. And definitely before the first use (installation). You can not consider it already calibrated since it is new. Pressure gages are a bit difficult to calibrate (when you compare them to wall or hand-held thermometers, pH-meters...) and I would ask a measuring and calibration company to do it. Very often, the manufacturer of the equipment would be happy to calibrate the instrument and issue a certificate (for an additional fee of course). I know that this may be costly, but by doing this you show a commitment to your program.

Regarding records, there should be at least three documents: instructions manual (if there is one), written description of the calibration method containing calibration frequency issued by the manufacturer (an email from them, or website printout should suffice), and the calibration certificate itself.

Hope this helps.

What Psunjka has mentioned is fine and I agree with his suggested comments.

Cheers

Yes, the guys have this one right. If the gauge plays a role important to the safe production of food then it needs to be calibrated prior to use. It should also be included on a calibration plan.

In terms of documentation your system should address the following:

1. Assessment of risk - how critical is the item of measuring and monitroing to the safe production of food?
2. Calibration Programme - the when, who and how of the calibration requirement. You may also wish to consider tolerances on your calibration results.
3. Records of calibration (Internal and / or external certification)
4. Records of out of calibration results including adjustments made and corrective actions.

George

Dear Carine,

So what is it measuring ?

And what type is it, bourdon, transducer or ? ?

Rgds / Charles.C