4 replies to this topic

[Usman_ghani]

Actually we have a process in which machine make a 2 pcs can by press. There is crack and hole. Which cause hazard. To identify this hazar we install a camera. Here camera will be a oPRP.???

[Charles.C]

Actually we have a process in which machine make a 2 pcs can by press. There is crack and hole. Which cause hazard. To identify this hazar we install a camera. Here camera will be a oPRP.???

 

Hi Usman,

 

What you need is a method/program to prevent the "crack and whole".

[GMO]

It might be useful to know the process more.  What is the crack and hole caused by?  What hazard does that create?  Strictly speaking you can have a machine which is solely there to remove a hazard which shouldn't really have been there (metal detectors for example) and that could be a CCP or oPRP depending on what other controls are in place but I agree with Charles, from a control point of view you'd prefer to eliminate the hazard in the first place rather than remove it once it's there.  

 

Perhaps explain a bit more?

[Usman_ghani]

Yes camera detect .crack and hole in can.

[redfox]

Hello Usman,

 

It seems that you are putting cameras to detect the defects as you hole and cracks? Didnt you have corrective action to eliminate that defects? I understand that you only remove the defective cans, but are not addressing the root cause of that defects.

 

regards,

redfox