Jump to content

  • Quick Navigation
Photo

Hand Sanitizer Strength Verification

Share this

Best Answer , 20 March 2021 - 04:44 PM

Hi Charles,

 

The Standard states/asks:  Are there records (with corrective actions) that show antimicrobial strength testing of hand/foot/tool dip stations, and are there stock check and replenishment records for gel and spray stations?

 

Hi TJW,

 

Thks info.

I deduce you are referring to this -

 

5.13.06: Are there records (with corrective actions) that show anti-microbial strength testing of hand/foot/tool dip stations, and are there stock check and replenishment records for gel and spray stations?

Total compliance (3 points): The company should have a log sheet for evaluating the hand and/or foot and/or tool dip (where appropriate) stations
solution strength. The log sheet should include target antimicrobial concentration (ppm) and frequency of verification. The figures recorded must
match the type and graduation of the testing system being used. An omission would include where an out of spec concentration is recorded but
there is no record of corrective actions. Foot dips are required in processing audits operations (see 5.04.14). Any operation with hand, foot or tool
dips is required to keep monitoring records (uncontrolled dips are a hazard). Where hand gel or spray stations using prepared solutions are used,
there should be monitoring logs indicating stations are regularly checked to confirm units are stocked and operational

 

 

Seems reasonably explicit. I deduce operational data is minimally required to be shown as adequate.


  • You cannot start a new topic
  • Please log in to reply
4 replies to this topic
- - - - -

TJW

    Grade - MIFSQN

  • IFSQN Member
  • 82 posts
  • 5 thanks
1
Neutral

  • United States
    United States
  • Gender:Female

Posted 20 March 2021 - 01:27 AM

Hello, I'm new to Primus and was wondering if it would be required to verify the strength of hand sanitizer (gel/spray directly from the manufacture, no mixing at the plant)?  Thank you!



SQFconsultant

    SQFconsultant

  • IFSQN Fellow
  • 4,161 posts
  • 1040 thanks
957
Excellent

  • United States
    United States
  • Gender:Male
  • Interests:American Patriot
    WWG1WGA
    Never give up, never give in - always win!
    Banking off of the northwest wind; Sailing on summer breeze! I am home now on Martha's Vineyard Island

Posted 20 March 2021 - 03:04 AM

No, your own verification is not required as to the strength of an established type/brand.


  • TJW likes this
Kind regards,
Glenn Oster

GOC GROUP | SQF & EESystem Operations Consultant

www.glennoster.com

Thanked by 1 Member:
TJW

Charles.C

    Grade - FIFSQN

  • IFSQN Moderator
  • 19,975 posts
  • 5513 thanks
1,433
Excellent

  • Earth
    Earth
  • Gender:Male
  • Interests:SF
    TV
    Movies

Posted 20 March 2021 - 02:17 PM

Hello, I'm new to Primus and was wondering if it would be required to verify the strength of hand sanitizer (gel/spray directly from the manufacture, no mixing at the plant)?  Thank you!

 

Hi TJW,

 

So what does the Standard say, (if anything relevant) ?


  • TJW likes this

Kind Regards,

 

Charles.C


TJW

    Grade - MIFSQN

  • IFSQN Member
  • 82 posts
  • 5 thanks
1
Neutral

  • United States
    United States
  • Gender:Female

Posted 20 March 2021 - 03:40 PM

Hi TJW,

 

So what does the Standard say, (if anything relevant) ?

Hi Charles,

 

The Standard states/asks:  Are there records (with corrective actions) that show antimicrobial strength testing of hand/foot/tool dip stations, and are there stock check and replenishment records for gel and spray stations?



Charles.C

    Grade - FIFSQN

  • IFSQN Moderator
  • 19,975 posts
  • 5513 thanks
1,433
Excellent

  • Earth
    Earth
  • Gender:Male
  • Interests:SF
    TV
    Movies

Posted 20 March 2021 - 04:44 PM   Best Answer

Hi Charles,

 

The Standard states/asks:  Are there records (with corrective actions) that show antimicrobial strength testing of hand/foot/tool dip stations, and are there stock check and replenishment records for gel and spray stations?

 

Hi TJW,

 

Thks info.

I deduce you are referring to this -

 

5.13.06: Are there records (with corrective actions) that show anti-microbial strength testing of hand/foot/tool dip stations, and are there stock check and replenishment records for gel and spray stations?

Total compliance (3 points): The company should have a log sheet for evaluating the hand and/or foot and/or tool dip (where appropriate) stations
solution strength. The log sheet should include target antimicrobial concentration (ppm) and frequency of verification. The figures recorded must
match the type and graduation of the testing system being used. An omission would include where an out of spec concentration is recorded but
there is no record of corrective actions. Foot dips are required in processing audits operations (see 5.04.14). Any operation with hand, foot or tool
dips is required to keep monitoring records (uncontrolled dips are a hazard). Where hand gel or spray stations using prepared solutions are used,
there should be monitoring logs indicating stations are regularly checked to confirm units are stocked and operational

 

 

Seems reasonably explicit. I deduce operational data is minimally required to be shown as adequate.


  • TJW likes this

Kind Regards,

 

Charles.C


Thanked by 1 Member:
TJW


Share this

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users