Jump to content

  • Quick Navigation
Photo
- - - - -

Type of Gloves for handling Frozen Products


  • You cannot start a new topic
  • Please log in to reply
3 replies to this topic

frankz

    Grade - Active

  • IFSQN Active
  • 1 posts
  • 0 thanks
0
Neutral

  • Philippines
    Philippines

Posted 12 May 2021 - 06:15 PM

Recently we have been having problems with foreign matter of particles from Nitrile Gloves which are used by our Food handlers. Are there any other type of gloves that can be used in handling Frozen products during packing? Which seems to tear unnoticeably. And what do you recommend as a Control Measure?



KingaZ

    Grade - Active

  • IFSQN Active
  • 5 posts
  • 2 thanks
1
Neutral

  • United Kingdom
    United Kingdom

Posted 13 May 2021 - 07:31 AM

Hi,

 

I can recommend MAPA Proffesional  Gloves, they have a really good range of different type of gloves approved to be used in Food Sector. I would check them out first.

 

Food industry | MAPA Professional (mapa-pro.co.uk)

 

Other that I know of:

Supertouch Blue Fish Scale Gloves - 500 Pack | Workwear101

 

Grippaz Nitrile Food Safety Gloves - SafetyGloves.co.uk

 

 

Hope this helps. 



Thanked by 1 Member:

Scampi

    Fellow

  • IFSQN Fellow
  • 3,831 posts
  • 1036 thanks
695
Excellent

  • Canada
    Canada
  • Gender:Not Telling

Posted 13 May 2021 - 02:11 PM

certain you don't want to order from Canada, but this is a good resource of what glove type in different environments

https://www.superior...ocessing-gloves


Please stop referring to me as Sir/sirs


Thanked by 1 Member:

Abby7

    Grade - Active

  • IFSQN Active
  • 19 posts
  • 1 thanks
0
Neutral

  • Canada
    Canada

Posted 13 May 2021 - 04:28 PM

Hello:

 

We are a frozen berry operation and use disposable nitrile gloves which are changed out at least every 2 hours.

"Pre-Covid" - we had a reliable source of 4.5 mil gloves which held up well.

However with the scarcity of PPE over the past 14 months we have received some which are lighter weight i.e. 3 mil and also some blended with vinyl.

Both of these type do tear much easier and need to be replaced more often, and I have made sure not to purchase any more!

 

As I am sure you are aware, you want to stay away from latex - so I would focus on the quality of the nitrile for my corrective action.

 

Our control measure has been short shop floor type training sessions to keep everyone focused on the risk of this type of contamination.

 

Hope this helps.






0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users