Jump to content

  • Quick Navigation
Photo
- - - - -

BAP Farm Standard 3.0 clause 3.1


  • You cannot start a new topic
  • Please log in to reply
3 replies to this topic

Maya Sri Mulyani

    Grade - Active

  • IFSQN Active
  • 11 posts
  • 0 thanks
0
Neutral

  • Indonesia
    Indonesia

Posted 31 January 2022 - 03:11 AM

Hi guys, can you help me about BAP farm standard 3.0?
 
1. How is implementation about clauses  3.1 Farms shall calculate environmental loading indices for total nitrogen and total phosphorus based on datcollected on production system type, feed conversion ratio and water exchange ?
2. Give me an example calculation of environmental loading indices.
3. Did Feed P content (%) must get from the feed supplier? if not where do i get it from?
 
Thanks,


juanolea1

    Grade - AIFSQN

  • IFSQN Associate
  • 36 posts
  • 16 thanks
11
Good

  • United States
    United States

Posted 31 January 2022 - 04:40 PM

Hello Maya,

 

I'm not familiar with this subject but it seems that appendix A of the standard goes through a couple of calculations: https://www.bapcerti...-March-2021.pdf

 

Also, it states that: "Feed P content (%) = ____________ (1% is the default P content, unless value is provided by feed supplier (pg.64)."

 

I hope it helps!



Maya Sri Mulyani

    Grade - Active

  • IFSQN Active
  • 11 posts
  • 0 thanks
0
Neutral

  • Indonesia
    Indonesia

Posted 01 February 2022 - 02:56 AM

Thank you juanolea1, yes you are right, but I am confused to determine the concentration of the feed P content value (%), whether from the feed supplier or from the default value of  (1%) ?



nurazamshah

    Grade - Active

  • IFSQN Active
  • 1 posts
  • 0 thanks
0
Neutral

  • Malaysia
    Malaysia

Posted 25 May 2022 - 12:00 PM






0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users