Chat logs from today's webinar:
Sujit Das DAS : good evening, this is sujit das from india
Mohammed ARAB : Hello, I" am Mohammed from Algeria
sanjeewa kumararathna : Good Night from Sri Lanka
Jennifer Taylor : Jennifer From Cato NY USA
Murali K Murthy murthy : Dr.Murthy from KSA
Edrian CUYOS : good evning edrian from Philippines
Rick Cooper : hello from California
moses mukui : Good evening, Moses from Krnya
Cindy Council : Cindy from NC
geri jones Jones : Hello from Indianapolis IN USA
Juston Cornet : good morning from canada
Ryan Mills
:
Just an FYI to all...Costco new audit standards require
X-Ray from their suppliers. Exception, is if you have a validated scientific justification why
X-Ray won't work, or you have other physical barriers for foreign material in the process.
Robert Robert : good morning from trinidad
Samir Ghosh : Good evening...this is Samir Kumar Ghosh from India
Stijn Hommes : Good afternoon from the Netherlands
ADANNA ILOEGBUNAM ILOEGBUNAM : Hi Everyone, Adanna Iloegbunam, BNSL LTD. Nigeria
Rojda Canbazoglu : Good evening form Tukey
Aiesha Beasley : Good morning from Maryland
Jan Hendrikx : Good afternoon from the Netherlands
Bev Bev : Good morning from California!
Neda Yaghoubi Rafi : I amNeda from MONTREAL
RICHARD KABUNGO : how are you
Bryce Grant : Jamaica 🇯🇲 representing
Ryan Palmer : Good morning from NB canada
Jaco Oosthuizen : Good afternoon from zambia
Sergejs Sergejevs : Good afternoon from Latvija
Rick Reyes : Good morning from Sunny Weiser Idaho USA
Angela DeMocko : Hello! From Northern California.
Elizabeth Hernandez : Hello from Canada
Zafar Iqbal Iqbal : Hi
Brenda Granados : Hello from Mexico
Kristina Gjini : Hello from Albania
Zafar Iqbal Iqbal : Hi
Ryan Mills : Hello from Alabama, USA. Happy St. Patty's Day to all!
Bryce Grant : Today is my birthday 🥳 happy st Patrick’s day ðŸ€
Cindy Halbleib : Cindy Halbleib
Cora Canaria Canaria : Joining from WA
Edgar G. Gonzaga : Good Evening Sir
Bev Bev : Happy birthday Bryce!!!
RICHARD KABUNGO : hello its richard from zambia
Jansen Lee : Hello from beautiful British Columbia Canada
Charles Zottorvi : Hi
Laiza Murguia : .
PABLO DEL RIO : Hello from Miami
Stijn Hommes : I had several suppliers claim that since they had ferrous and stainless steel detection, a test piece for non-ferrous metals was not required. How did they draw that conclusion and what is your view on this?
Alter Valerio : Good day from Manila
Stijn Hommes
:
How do you ensure your
X-ray is well-tested? You can't check for all foreign materials. Which checks are mandatory in your view?
Santhosh M : Hi from india
RICHARD KABUNGO : Hello it's Joseph from zambia
Steve Brown : Hi all from Dover, UK
Mariana Shivacheva : Hello everyone from San Francisco, CA
DHANYA K : Hi
Kerwin Feliz : Hi Everyone
Luis Bravo : Buenos dias
Janelle Nicholas : Good morning from NJ
Luis Bravo : luis bravo
Andre Vieira : Hi all. As one of your local representatives for Mettler Toledo Product Inspection for Canada. Don't hesitate to reach to us at www.shawpak.com
Leiby Ruiz : Happy Friday all!
Luis Bravo : lebravoa@hotmail.com
Rojda Canbazoglu : There is a problem to hear them, is it same with you?
Alyssa J : Good morning from snowy New Mexico
Marina Rusli Rusli : Hi, How to handle false rejections? Can false rejects be introduced back to the line?
Enrique Ruvalcaba : Hello everyone from Alsip, Illinois
Hasan Delikaya DELIKAYA : Hello Everybody from Chicago, IL
AbdulRahman Abbas : Good evening from Dubai
Karine Primeau
:
If I have higher accuracy with the
X-Ray on ferrous metals than with a
metal detector, but with the
X-Ray I can't detect aluminium, should I keep the 2 equipment on my production line?
Ryan Mills
:
How long does it typically take to "learn" an
X-Ray machine to your product(s)?
OH HO : X-ray machine... Where is the least sensitivity area that has to be concern to place the test piece through the aparture?
jeanne uwimana : Hello from Rwanda
Walter Nkala : Hello from Johannesburg, South Africa
Luis Bravo : sin problemas de video u audio
Luis Bravo : no
Alyssa J
:
For non-uniform, overlapping product like salsa with various chunk sizes, we would use a dual energy
x-ray system? With unique products, do each have to be "calibrated?" by the
x-ray manufacturer? ?
ROCHELLE WILLIAMS
:
Hi from (overcast) Jamaica
Santhosh M : stainless is non magnetic, then how we can control contaminant through metal detectors
Dheivendran Letchuman : How about aluminium metal please
Santhosh M : In X ray detector the contaminant density is less than product density how we can control the contaminant in X ray detector
Stijn Hommes : Thanks. Very helpful answers!
RICHARD KABUNGO
:
how do you ensure that
x-ray is well tested?
ADANNA ILOEGBUNAM ILOEGBUNAM
:
What is the best equipment to use for
metal detection, with primary packaging of aluminium laminate , with powdered premix as the product.
Marina Rusli Rusli
:
How do you test contamination from pieces of small wood from broken pallet by using
Xray due to the low density of small debris from the broken pallet?
Juston Cornet
:
Is there any evidence of
X-ray detection effecting the quality of the product?
Walter Nkala
:
I have
x-ray as a
CCP, I am struggling to identify critical control parameters, any advice?
Santhosh M : For example pet food churpi is having 5cm height which is contaminated with metal will metal detectors detect that
Hasan Delikaya DELIKAYA : Position of products are crucial for 3 metal contaminants...what is the good position of product to feed thru. MD for 3 metal contaminants ??
Emmanuel Umukunzi : What could be the cause when all probes (Fe, Non Fe and SS) used during calibration failed during verification of metal detectors?
ibrahim salaey : What kind of system do you think would be best for a manufacturing facility that produces products that are not uniform (i.e. bags of kibble manufactured that vary by size, weights and density)
Karine Primeau : Do you know why in Europe companies are going back and removing X-Rays to get back metal detectors?
Andrei Cerghet : would a company need to hire an employee with certian qualifications/background or just a training is adequate?
Gomez Medina GOMEZ MEDINA : Hi from Mexico
Pratik Goregaonkar Goregaonkar : From Canada
Michael Moyo Moyo : Greetings from Bulawayo, Zimbabwe
Michael Moyo Moyo
:
Is there a difference in effectiveness between
X-Ray Machine and Gamma Ray machine detection?
RICHARD KABUNGO : HELLO ITS RICHARD FROM ZAMBIA
Mohammed ARAB : after the first validation IQ OQ PQ, what is mandatory time to revalidate the system?
Mohammed ARAB : is it mandatory to constitute a set pf default to challenge the systeme periodicaly
Eric Rudge : We have baked goods. sometimes we can have more than just metal in the product. Can we still use metal detectors?
Eric Rudge : We have baked goods. sometimes we can have more than just metal in the product. Can we still use metal detectors?
Paola Barbosa
:
x-ray is useful for quality applicantions? Example: can we use
x-ray for evaluating the amount of a fruit filling in muffins?
irrum Babu : Hello, Irrum Babu frm pakistan
Sujit Das DAS
:
Is there any chances of radio active contamination to the product passing through
X-Ray system
Angeline Thangamani : Angeline from India
Angeline Thangamani : Does the person working near x ray detector gets affected with the ray
Ryan Mills
:
Just an FYI to all...Costco just put in a requirement for
X-Ray from all supplier.s.
Devi Yuryana Hastuti Yuryana Hastuti
:
How about magnet trap on the chute of packing or bagging before
metal detector? Is it effective to reduce the number of
metal contamination?
Alter Valerio : how does the x ray machine affect the operator's health if he is exposed to the machine every day
Marino Dait : Hello from Pilipinas
Angeline Thangamani : Does a person working near x ray detector gets affected with the rays
Alyssa J : COSTCO new requirements also include the unannounced audit every year
Mohammed ARAB : is it mandatory to constitute a set of deffect in order to challenge the system time to time
Alyssa J : Great as usual. thank you and thanks for allowing more time for questions.
Janelle Nicholas : Thank you. Have a good weekend.
Jan Hendrikx : Thanks! for the questions and answers!
