Best Answer Gelato Quality Lead, 14 August 2023 - 09:17 PM
Based on the Supplier Assurance manual for food manufacturing sites, the trace must be finished within 4 hours and recover 99.5% - 105%.
Link to manual: https://d2evkimvhatq...df?v=1594929799
Grade - Active
Posted 10 August 2023 - 07:08 AM
Hi all,
Our organization is trying to get certified for NSF. I would just like to know if there is a maximum target time to trace for NSF? And if it has a mandated computation for mass and balance. Thanks in advance!
Grade - FIFSQN
Posted 10 August 2023 - 07:57 PM
-Setanta
Grade - FIFSQN
Posted 11 August 2023 - 03:45 AM
Hi semolinaflour,
Traceability standards vary, best practice would be 4 hours, but you need to consider the relevant standard.
Are you looking for a specific NSF product or type of certification?
The range offered by NSF is on these webpages:
https://www.nsf.org/...e=certification
https://www.nsf.org/...e=certification
Other than that they offer certification to your preferred Global Food Safety Initiative (GFSI) benchmarked scheme.
Kind regards,
Tony
IFSQN Implementation Packages, helping sites achieve food safety certification since 2009:
Practical Internal Auditor Training for Food Operations - Available via the previous webinar recording.
Suitable for Internal Auditors as per the requirements of GFSI benchmarked standards including BRCGS and SQF.
Practical HACCP Training for Food Safety Teams available via the recording until the next live webinar.
Suitable for food safety (HACCP) team members as per the requirements of GFSI benchmarked standards including BRCGS and SQF.
Grade - Active
Posted 13 August 2023 - 04:17 AM
Hi all,
Appreciate your responses! Our organization is targeting NSF certification for Supplier Assurance Audit.
Grade - MIFSQN
Posted 14 August 2023 - 09:17 PM Best Answer
Based on the Supplier Assurance manual for food manufacturing sites, the trace must be finished within 4 hours and recover 99.5% - 105%.
Link to manual: https://d2evkimvhatq...df?v=1594929799
Grade - Active
Posted 19 August 2023 - 02:32 AM
Thank you so much @Gelato Quality Lead 
0 members, 1 guests, 0 anonymous users
