Jump to content

  • Quick Navigation
Photo

Vacuum machines to replace brushes - recommendations and advice sought


  • You cannot start a new topic
  • Please log in to reply
3 replies to this topic

#1 hygienic

hygienic

    Grade - SIFSQN

  • IFSQN Senior
  • 434 posts
  • 22 thanks
2
Neutral

  • Earth
    Earth
  • Gender:Male

Posted 15 July 2011 - 03:53 PM

Dear All;

We are looking to reduce using of bruches in the kithcen , so I think it is better to replace them with Vaccume machines can pull the food debrises from the floor or from the food preparation tables , Do you know any kind of machines for this particular purpose ?

Regards
Hygienic



#2 hygienic

hygienic

    Grade - SIFSQN

  • IFSQN Senior
  • 434 posts
  • 22 thanks
2
Neutral

  • Earth
    Earth
  • Gender:Male

Posted 19 July 2011 - 05:42 PM

Simon says ,When there is no response . Any member can help hygienic ???

Regards
Hygienic



#3 mgourley

mgourley

    Grade - FIFSQN

  • IFSQN Fellow
  • 1,268 posts
  • 944 thanks
206
Excellent

  • United States
    United States
  • Gender:Male
  • Location:Plant City, FL
  • Interests:Cooking, golf, firearms, food safety and sanitation.

Posted 20 July 2011 - 12:48 AM

Without knowing your actual situation, I would say this... Most vacuums exhaust air as well as suck in debris. If you had a tear in the vacuum filter you would be at risk of blowing debris out of the exhaust port, potentially causing more problems.

Marshall



#4 Charles.C

Charles.C

    Grade - FIFSQN

  • IFSQN Moderator
  • 18,608 posts
  • 5210 thanks
1,186
Excellent

  • Earth
    Earth
  • Gender:Male
  • Interests:SF
    TV
    Movies

Posted 20 July 2011 - 06:35 AM

Dear hygienic,

It depends maybe on what situation/scale you are envisaging the use.

I hv seen an industrial analog to the type in use at airports but which is a combined brush/vacuum concept. Particularly intended for wide, flat surfaces and where detergents can be applied also if required. Not cheap and same comment for spare parts i believe but labour saving / efficient.
On the other hand, if you are looking for a cheap but larger version of the household unit, I suspect robustness will be a determining factor as implied in previous post. (seen a similar problem with various, mobile, gun-type HP cleaning units, small/cheap = short-lived :smile: ).

Rgds / Charles.C


Kind Regards,

 

Charles.C





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users