Your expert advice is required to all dry blending operators.
Using a ribbon style blender in the spice and seasoning mixing industry. The unit must be validated that it properly mixes all ingredients thoroughly and completely. The additive of concern is controlled substances as indicated under the Canadian Food and Drugs Act and Regulation.
The one I choose to use is sodium nitrite. thorough distribution is required to ensure that this substance is equivalently distributed in the finished product. This controls or prevents biological hazard and chemical hazard in finished product used in the dry ingredients users (meat shops).
What conditions would constitute re-validation?
change in equipment - adjustments in equipment,
change in motor drive which would affect the speed of the unit,
equipment maintenance affecting the speed or effectiveness of the mixing unit,
Others?
Collection of data is as follows:
produce batches every 4 months
batch size is 1000 kg
take 10 samples at determined number of bags (expect 10 samples every 5 bags during packaging)
samples sent to outside lab to test for nitrite (levels - %, ppm)
coefficient of variance (COV) is well below 2.0%
maximum level of COV is 10%
does several anlaysis of batches over 4-5 years suffice to validate this unit.
The only maintenance that is done is a change of busing on the unit which supports the main blending shaft which is ribbon style.
Can someone help me whether this data collection can be used to validate the ability of the mixer to blend evenly?
Can someone tell me if the time frame of data is adequate to provide for validation?
Thanks
Daryl