Jump to content

  • Quick Navigation
Photo

FSMA- Preventive Controls- Practical example of hazard analysis?

Share this

  • You cannot start a new topic
  • Please log in to reply
14 replies to this topic

MStud

    Grade - Active

  • IFSQN Active
  • 3 posts
  • 1 thanks
0
Neutral

  • Germany
    Germany

Posted 07 September 2017 - 11:18 AM

Dear all,

 

I am struggeling with the creation of the hazard analysis in compliance with FSMA /PCHF rule. Is there anyone, who can provide practical examples (PCQI Training)? I am aware with the basic required structures of the hazard analysis, but this would help to understand the implementation process much better!

 

​Thanks!



Thanked by 1 Member:

DBF

    Grade - Active

  • IFSQN Active
  • 1 posts
  • 1 thanks
1
Neutral

  • United States
    United States

Posted 07 September 2017 - 02:44 PM

Hello,

This isn't any training or example but what we did was create a column in our hazard analysis titled "Is Preventative control applied at this point" between "What control measures can be applied to prevent the significant hazards" and "Is this step a critical control point (ccp)".  Not sure if this helps you but as I said, it's what we did.



Thanked by 1 Member:

RMAV

    Grade - SIFSQN

  • IFSQN Senior
  • 407 posts
  • 122 thanks
44
Excellent

  • United States
    United States
  • Gender:Male
  • Location:USA - Midwest
  • Interests:QA, Micro, Sanitation;
    Meats, Juice, Condiments;
    SQF, Audit, and aviation

Posted 07 September 2017 - 07:18 PM

Starting around page 440 is an example hazard analysis straight from the standardized PCQI training.

 

https://www.ifsh.iit...2_Watermark.pdf



Thanked by 3 Members:

FurFarmandFork

    Food Safety Consultant, Production Supervisor

  • IFSQN Fellow
  • 1,264 posts
  • 590 thanks
206
Excellent

  • United States
    United States
  • Gender:Male
  • Location:Oregon, USA

Posted 08 September 2017 - 06:55 PM

FDA also has a food safety plan builder you can use to create something compliant.

 

https://www.accessda...etyPlanBuilder/


Austin Bouck
Owner/Consultant at Fur, Farm, and Fork.
Consulting for companies needing effective, lean food safety systems and solutions.

Subscribe to the blog at furfarmandfork.com for food safety research, insights, and analysis.

Thanked by 2 Members:

Charles.C

    Grade - FIFSQN

  • IFSQN Moderator
  • 20,542 posts
  • 5662 thanks
1,544
Excellent

  • Earth
    Earth
  • Gender:Male
  • Interests:SF
    TV
    Movies

Posted 09 September 2017 - 05:24 AM

Dear all,

 

I am struggeling with the creation of the hazard analysis in compliance with FSMA /PCHF rule. Is there anyone, who can provide practical examples (PCQI Training)? I am aware with the basic required structures of the hazard analysis, but this would help to understand the implementation process much better!

 

​Thanks!

 

Hi Mstud,

 

Here is an introductory example generously posted here ca 2 years ago by mgourley -

 

Attached File  FSMA Food Plan Example.pdf   841.65KB   892 downloads


Kind Regards,

 

Charles.C


Thanked by 6 Members:

usmanashraf

    Grade - Active

  • IFSQN Active
  • 17 posts
  • 2 thanks
0
Neutral

  • Pakistan
    Pakistan

Posted 09 September 2017 - 06:22 AM

I was looking for the the same. Thanks



Thanked by 1 Member:

MsFS

    Grade - Active

  • IFSQN Active
  • 23 posts
  • 7 thanks
2
Neutral

  • United States
    United States

Posted 06 June 2018 - 08:43 PM

After having our FDA PC Inspection, I highly suggest thoroughly using this as a reference:

 

https://www.fda.gov/...n/ucm517412.htm

 

The expectation of our Inspector was that every applicable PC listed in Appendix 1 for each raw material is covered in your HARPC plan.

 

https://www.fda.gov/...A/UCM517402.pdf



Thanked by 2 Members:

mgourley

    Grade - FIFSQN

  • IFSQN Fellow
  • 1,403 posts
  • 997 thanks
274
Excellent

  • United States
    United States
  • Gender:Male
  • Location:Plant City, FL
  • Interests:Cooking, golf, firearms, food safety and sanitation.

Posted 06 June 2018 - 10:24 PM

Yep.

 

Marshall



Charles.C

    Grade - FIFSQN

  • IFSQN Moderator
  • 20,542 posts
  • 5662 thanks
1,544
Excellent

  • Earth
    Earth
  • Gender:Male
  • Interests:SF
    TV
    Movies

Posted 06 June 2018 - 10:55 PM

After having our FDA PC Inspection, I highly suggest thoroughly using this as a reference:

 

https://www.fda.gov/...n/ucm517412.htm

 

The expectation of our Inspector was that every applicable PC listed in Appendix 1 for each raw material is covered in your HARPC plan.

 

https://www.fda.gov/...A/UCM517402.pdf

 

Hi MsFS,

 

I cannot see any worked out examples of a Process hazard analysis in 1st Link/1st download (306 Pgs) ?


Kind Regards,

 

Charles.C


MsFS

    Grade - Active

  • IFSQN Active
  • 23 posts
  • 7 thanks
2
Neutral

  • United States
    United States

Posted 08 June 2018 - 12:32 PM

Hi MsFS,

 

I cannot see any worked out examples of a Process hazard analysis in 1st Link/1st download (306 Pgs) ?

 

The FDA website has a drop down entitled "download the draft guidance".  Once you select the down arrow next to it, a list of the entire guidance is available for download.  Chapters 7-14, 16 and Appendix 4 are still "coming soon".

 

https://www.fda.gov/...n/UCM517610.pdf

 

Hope this helps!



Charles.C

    Grade - FIFSQN

  • IFSQN Moderator
  • 20,542 posts
  • 5662 thanks
1,544
Excellent

  • Earth
    Earth
  • Gender:Male
  • Interests:SF
    TV
    Movies

Posted 08 June 2018 - 05:07 PM

The FDA website has a drop down entitled "download the draft guidance".  Once you select the down arrow next to it, a list of the entire guidance is available for download.  Chapters 7-14, 16 and Appendix 4 are still "coming soon".

 

https://www.fda.gov/...n/UCM517610.pdf

 

Hope this helps!

 

Thks.

 

But where are the specific process examples ?


Kind Regards,

 

Charles.C


MsFS

    Grade - Active

  • IFSQN Active
  • 23 posts
  • 7 thanks
2
Neutral

  • United States
    United States

Posted 08 June 2018 - 06:47 PM

Thks.

 

But where are the specific process examples ?

 

I see your point.  :smile:

 

Among all those pages......there are none.  



jithu_fj

    Grade - Active

  • IFSQN Active
  • 2 posts
  • 0 thanks
0
Neutral

  • United States
    United States

Posted 03 October 2023 - 05:32 AM

I was looking for the the same. Thanks

do you have any sample FSVP plan with you that you can share? If so that will be super helpful for me as I am completely new to this



kingstudruler1

    Grade - PIFSQN

  • IFSQN Principal
  • 825 posts
  • 284 thanks
242
Excellent

  • United States
    United States

Posted 03 October 2023 - 06:19 AM

do you have any sample FSVP plan with you that you can share? If so that will be super helpful for me as I am completely new to this

 

 

Have you taken the FSVP course?   Like preventive controls, FSVP requires a qualified individual.  

 

I used https://www.afius.org/   they have a zoom course in a couple of weeks. 


Edited by kingstudruler1, 03 October 2023 - 06:19 AM.

eb2fee_785dceddab034fa1a30dd80c7e21f1d7~

    Twofishfs@gmail.com

 


jithu_fj

    Grade - Active

  • IFSQN Active
  • 2 posts
  • 0 thanks
0
Neutral

  • United States
    United States

Posted 03 October 2023 - 06:24 AM

I attended FSVP zoom course and got training certificate however I was wondering if you had any sample FSVP plan document for any product. I have work aid A, G, etc with me though.





Share this


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users