Jump to content

  • Quick Navigation
Photo

One set of test pieces for similar products but different weights?

Share this

  • You cannot start a new topic
  • Please log in to reply
3 replies to this topic

sniadanie

    Grade - Active

  • IFSQN Active
  • 11 posts
  • 0 thanks
0
Neutral

  • United Kingdom
    United Kingdom

Posted 08 January 2018 - 02:38 PM

hi

can we use one  set of metal detection test pieces for similar products but different weights .

 

we use 3.5 ferrous. 4.5 non ferrous and 5.0 s/steel 

the product are low moisture <14% and most of them are blended seasonings some have higher salt levels then others .

we pack the product  in 25kg packs and currently use the above test pieces ,my question is can i use the same test pieces or would i have to carry out sensitivity checks on 16kg and 10kg ?

and how would i do this please ( i am very new to metal detection so not sure ) 

 

thanks in advance 


  • 0

Charles.C

    Grade - FIFSQN

  • IFSQN Moderator
  • 20,542 posts
  • 5680 thanks
1,550
Excellent

  • Earth
    Earth
  • Gender:Male
  • Interests:SF
    TV
    Movies

Posted 08 January 2018 - 06:58 PM

hi

can we use one  set of metal detection test pieces for similar products but different weights .

 

we use 3.5 ferrous. 4.5 non ferrous and 5.0 s/steel 

the product are low moisture <14% and most of them are blended seasonings some have higher salt levels then others .

we pack the product  in 25kg packs and currently use the above test pieces ,my question is can i use the same test pieces or would i have to carry out sensitivity checks on 16kg and 10kg ?

and how would i do this please ( i am very new to metal detection so not sure ) 

 

thanks in advance 

 

Hi sniadanie,

 

Basic answer is YES.

 

Is there a FS Standard related to yr query ? eg BRC ?


  • 0

Kind Regards,

 

Charles.C


sniadanie

    Grade - Active

  • IFSQN Active
  • 11 posts
  • 0 thanks
0
Neutral

  • United Kingdom
    United Kingdom

Posted 09 January 2018 - 10:30 AM

hello Charles C

 

Thank you ,we have to comply with BRC and M&S 


  • 0

Charles.C

    Grade - FIFSQN

  • IFSQN Moderator
  • 20,542 posts
  • 5680 thanks
1,550
Excellent

  • Earth
    Earth
  • Gender:Male
  • Interests:SF
    TV
    Movies

Posted 09 January 2018 - 01:32 PM

hello Charles C

 

Thank you ,we have to comply with BRC and M&S 

 

Hi sniadanie,

 

and how would i do this please ( i am very new to metal detection so not sure )

 

 

I assume you have a copy of BRC Standard in which case a Procedure is discussed in this thread -

 

http://www.ifsqn.com...ctors-accepted/

(particularly see Posts 7-9)

 

Regarding M&S sorry no idea but other posters may know.


  • 0

Kind Regards,

 

Charles.C




Share this

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users