Jump to content

  • Quick Navigation
Photo
- - - - -

In-house Sampling Storage


  • You cannot start a new topic
  • Please log in to reply
5 replies to this topic

#1 Sabear

Sabear

    Grade - MIFSQN

  • IFSQN Member
  • 60 posts
  • 3 thanks
3
Neutral

  • United States
    United States
  • Gender:Male
  • Location:California

Posted 17 October 2018 - 05:59 PM

We take in-house samples, about 60 samples a day. We hold back these samples for several days. Wondering if anyone has any suggestions on what type of container to use to maintain these samples that is reusable (no glass or brittle plastic). Product is a dry good (seed) only a couple pounds per sample so containers don't have to be too large. 

 

 

Thanks in advance.



#2 Scampi

Scampi

    Fellow

  • IFSQN Fellow
  • 2,832 posts
  • 779 thanks
344
Excellent

  • Canada
    Canada
  • Gender:Not Telling

Posted 17 October 2018 - 06:41 PM

These are not brittle, come in a lot of sizes and you can get lids as well

 

https://www.globalin...e=4&webCatKey=0

 

Rubbermaid also makes these in clear

 

I know the grey ones are not brittle as we use them here and you can flex them quite a bit


Because we always have is never an appropriate response!


#3 Sabear

Sabear

    Grade - MIFSQN

  • IFSQN Member
  • 60 posts
  • 3 thanks
3
Neutral

  • United States
    United States
  • Gender:Male
  • Location:California

Posted 17 October 2018 - 08:35 PM

Thank you Scampi!

 

Do you perform a daily or weekly inspection over these?



#4 Kerry785

Kerry785

    Grade - Active

  • IFSQN Active
  • 22 posts
  • 4 thanks
1
Neutral

  • United States
    United States

Posted 18 October 2018 - 01:35 PM

Our retention samples are stored in boxes on pallets and discarded after 2 years.



#5 Scampi

Scampi

    Fellow

  • IFSQN Fellow
  • 2,832 posts
  • 779 thanks
344
Excellent

  • Canada
    Canada
  • Gender:Not Telling

Posted 18 October 2018 - 02:52 PM

If they are stored away or separate from your regular storage area (locked cabinet perhaps) then I would only check them upon USE

 

So lets say you've got 50 of them, clean and ready to use stashed away, and you need 2. You would inspect them for integrity and cleanliness at that time and make a note on the pre op or daily GMP record. That way if there was an issue with plastic in your product, you would have a record that they were OK as per inspection


Because we always have is never an appropriate response!


#6 Charles.C

Charles.C

    Grade - FIFSQN

  • IFSQN Moderator
  • 17,396 posts
  • 4841 thanks
945
Excellent

  • Earth
    Earth
  • Gender:Male
  • Interests:SF
    TV
    Movies

Posted 18 October 2018 - 08:48 PM

We take in-house samples, about 60 samples a day. We hold back these samples for several days. Wondering if anyone has any suggestions on what type of container to use to maintain these samples that is reusable (no glass or brittle plastic). Product is a dry good (seed) only a couple pounds per sample so containers don't have to be too large. 

 

 

Thanks in advance.

 

Just curious. Why so many ? 30 x 2 different product lines every day ?


Kind Regards,

 

Charles.C





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

EV SSL Certificate