10 replies to this topic

[Shazlin88]

May I know, is there any alternative besides glue board for third barrier pest control?
Glue board is cannot be used since the dust from raw material in feedmill will affect the glueboard.

Thanks.

[tamdongnai]

Dear Shazlin88

Installing third barrier pest control: by trapper tunnel or plastic dust cover

[Shazlin88]

Dear Shazlin88

Installing third barrier pest control: by trapper tunnel or plastic dust cover

Plastic dust cover? what do you mean? is there any glue below the plastic?

[EagleEye]

Hi there,

 

What are your target pests?

[SQFconsultant]

For rats and mice you could install your glue boards under a 1/2 moon cover, thus preventing dust from settling onto the boards - rats and mice run thru and BAM,done!

[Scampi]

Tin cats all the way

http://www.victorpes...ouse-trap-m310s

 

If you're talking about outside, they really should be bait stations and not traps IMO

[Shazlin88]

Hi there,
 
What are your target pests?

My target pest is rodent in this case.

[Shazlin88]

Tin cats all the way
http://www.victorpes...ouse-trap-m310s
 
If you're talking about outside, they really should be bait stations and not traps IMO

No-no.. the third barrier is inside the buildings.

[pmrinze]

Use mechanical trap, for example
JT EATON =JAWS
CATCHMASTER = EZ-SET

Inside a station

Regards

Pablo


Enviado desde mi iPad utilizando Tapatalk

[MsMars]

IME dust gets absolutely everywhere inside the mill, so glue traps are pretty much useless, even with covers.  Agree with other posts - "tin cats" or other traps are best. 

[Marcowilson12]

My target pest is rodent in this case.

 

 

 

 

Hello there,

 

Your target rodent but I thing your take a pest control service but the better company you're check. Otherwise rodent control, mice control. rat control, etc. services need you can contact pest control Sydney company & get the information.