Jump to content

  • Quick Navigation
Photo
- - - - -

Perspex or Laminated glass in production area?


  • You cannot start a new topic
  • Please log in to reply
2 replies to this topic

Theestudent

    Grade - Active

  • IFSQN Active
  • 9 posts
  • 0 thanks
0
Neutral

  • Zambia
    Zambia

Posted 07 August 2019 - 08:35 PM

Hello, what material is good to use in Production area or office sharing wall/window with production area, perspex or laminated glass?



SQFconsultant

    SQFconsultant

  • IFSQN Fellow
  • 3,747 posts
  • 943 thanks
829
Excellent

  • United States
    United States
  • Gender:Male
  • Interests:American Patriot
    WWG1WGA
    Never give up, never give in - always win!
    Martha's Vineyard Island, Massachusetts

Posted 07 August 2019 - 09:00 PM

Hello, what material is good to use in Production area or office sharing wall/window with production area, perspex or laminated glass?

in general you need to ensure the material is shatterproof - if that is arrived at with inherently shatterproof glass, plexiglass (Perspex is a brand name for Plexiglass, also known as Poly) or other material you should be fine.  The only issue that can be created is that you want to ensure that the material does not in anyway impact food safety or personnel safety with potential fume off from chemicals that are used in making the material. So, always check to ensure that the material can be used in food factory, get spec sheets for your file and be able to back up shatterproof charateristics of the material used.


Kind regards,
Glenn Oster
 
GOC BUSINESS GROUP | SQF System Development, Implementation & Certification Consultants
Internal Auditor Training - eConsultant Retainer Subscriptions - Pre & Post SQF-GAP Audits - Consultant Training
Visit us @ http://www.GlennOster.com  or call us @ 772.646.4115 US-EST 8am-4pm Anyday except Thursday
 
 

Theestudent

    Grade - Active

  • IFSQN Active
  • 9 posts
  • 0 thanks
0
Neutral

  • Zambia
    Zambia

Posted 08 August 2019 - 09:59 PM

Thank you






0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users