Jump to content

  • Quick Navigation
Photo

Minimum acceptable gauss strength of magnets for sugar industry


  • You cannot start a new topic
  • Please log in to reply
3 replies to this topic

bebeau12

    Grade - Active

  • IFSQN Active
  • 1 posts
  • 0 thanks
0
Neutral

  • Philippines
    Philippines

Posted 30 January 2022 - 06:01 AM

Hi,

 

Is there anyone here familiar with FSSC standards? I would like to know what is the minimum gauss strength of magnet for sugar industry? thank you



Charles.C

    Grade - FIFSQN

  • IFSQN Moderator
  • 19,504 posts
  • 5408 thanks
1,342
Excellent

  • Earth
    Earth
  • Gender:Male
  • Interests:SF
    TV
    Movies

Posted 30 January 2022 - 03:10 PM

Hi,

 

Is there anyone here familiar with FSSC standards? I would like to know what is the minimum gauss strength of magnet for sugar industry? thank you

Hi bebeau,

 

Based on various earlier threads here, IIRC, the typical (technical) answer for food applications seems to be 10,000 gauss.


Kind Regards,

 

Charles.C


PQEdwards

    Grade - AIFSQN

  • IFSQN Associate
  • 25 posts
  • 2 thanks
3
Neutral

  • United Kingdom
    United Kingdom

Posted 09 February 2022 - 08:36 AM

Hi Bebeau,

 

 

I don't know if there is anything more upto date but we found publication AMR180917 Rev. 1 quite useful. It documents that best practice is as a final magnet the strength be 10,000 gauss at 22mm pole centres, at food contact. It is documented 8,500 gauss was minimum tolerance of original 10,000 gauss on supply, allowing for up to 15% deterioration after installation.

Regards

John

 

 

 

 

 

 

 

 



Charles.C

    Grade - FIFSQN

  • IFSQN Moderator
  • 19,504 posts
  • 5408 thanks
1,342
Excellent

  • Earth
    Earth
  • Gender:Male
  • Interests:SF
    TV
    Movies

Posted 09 February 2022 - 08:47 AM

Hi Bebeau,

 

 

I don't know if there is anything more upto date but we found publication AMR180917 Rev. 1 quite useful. It documents that best practice is as a final magnet the strength be 10,000 gauss at 22mm pole centres, at food contact. It is documented 8,500 gauss was minimum tolerance of original 10,000 gauss on supply, allowing for up to 15% deterioration after installation.

Regards

John

 

 

 

 

 

Hi John,

 

Thanks for input.

 

Yes, I think this previous post agreed yr comments -

 

https://www.ifsqn.co...ry/#entry150040


Kind Regards,

 

Charles.C


Thanked by 1 Member:



1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users