Grade - SIFSQN
Posted 02 February 2022 - 06:44 PM
The control panels on some of our equipment gets really grimy from people using it with their gloves on.
Constant cleaning isn't good for the panels.
Covering the panels with plastic bags isn't the best idea either.
I was wondering if there is anything available, like a plastic sheeting that sticks over a control panel that can be torn off and easily replaced as needed?
SQFconsultant
Posted 02 February 2022 - 08:15 PM
We use thin plastic film on ours, lasts all day an then simply peel and toss.
All the Best,
All Rights Reserved,
Without Prejudice,
Glenn Oster.
Glenn Oster Consulting, LLC
Consulting on: SQF Food Safety System Development, Implementation & Certification
eConsultant Retainer | Internal Auditor Training | Corrective Action Avoidance | XRP & XLM
Vineyard Haven, Martha's Vineyard Island, Massachussetts
Republic of these United States (restored)
www.GlennOster.com | 774.563.6161 | glenn@glennoster.com
Grade - AIFSQN
Posted 02 February 2022 - 08:21 PM
Hi Glenn, would it be possible to post a link to the product?
Grade - MIFSQN
Posted 02 February 2022 - 08:30 PM
Hi Glenn, would it be possible to post a link to the product?
Glann may be able to provide a better answer, but this is what we used for a small touch screen at a previous job.
https://www.mdsassoc...ilm-16in-x-10in
The sheets come in a roll of 300 for $33. Pretty affordable
They were designed for laptop screens, so they are 10"x16". I would suggest making a template of the screen and using that template to cut the sheets to size.
Hope this helps!
0 members, 0 guests, 0 anonymous users
