10 replies to this topic

[QAKat]

Hello, 

 

Can someone please share their new equipment & commissioning checklist. Or can someone look at the one we have and make suggestions on wether it is ok or if you would suggest modifications.

It is for SQF 11.1

 

Thank you.

[QAKat]

:)

Attached Files

•  New Equipment Research & Commissioning Checklist.pdf   53.61KB   413 downloads

[Scotty_SQF]

I think it looks good.  My only suggestion would be keeping track of any corrections or corrective actions you would have to do based on this.  Such as adding items to your Glass and Brittle Plastic list, etc.  I can honestly say when I have been audited and asked if we have one, the auditor glances at it and moves on to the next section.  The important part here is that you have one in place and it is being utilized.

[mgourley]

Here is one that is a bit more involved.

 

Marshall

Attached Files

•  Equipment Design Checklist.xlsx   124KB   347 downloads

[QAKat]

I think it looks good.  My only suggestion would be keeping track of any corrections or corrective actions you would have to do based on this.  Such as adding items to your Glass and Brittle Plastic list, etc.  I can honestly say when I have been audited and asked if we have one, the auditor glances at it and moves on to the next section.  The important part here is that you have one in place and it is being utilized.

Hi Scotty, 

 

Thanks for the input.

We recently have had many new & used machines being brought into the facility. As soon as the machines are brought in this form gets filled out by president, general manager and myself. I check for whatever I have to deal with and add them to the appropriate sections of the program like the glass & brittle, SSOP's, etc. Besides that I am not sure how I would keep track if I do not add them to the program right away. 

[QAKat]

Here is one that is a bit more involved.

 

Marshall

Hi Marshall, 

 

I like your form. It is more involved and less generic. I will be using it to improve the one I have.

 

Thank you!

[mgourley]

Hi Marshall, 

 

I like your form. It is more involved and less generic. I will be using it to improve the one I have.

 

Thank you!

 

I can't take credit for it, but I am glad that you found it useful.

 

Marshall

[shookimogh]

Here is one that is a bit more involved.

 

Marshall

Hi, I found this form here. and thanks for sharing. we produce fish RTE products. I have 3 concerns:

1-Is this form still applicable for us ?

2-Who should fill this out? Supplier company or us?

3-Looks like its only for commissioning, can you also advise some purchasing requirements? what sort of things should we ask the supplier to provide us?

 

Thank you in advance

[mgourley]

1. Should be.

2. If you have someone on staff that is familiar with Sanitary Design Principles, that person should be involved. I'm sure you could also get input from the equipment manufacturer or the equipment installer if the supplier is doing the installation.

3. I would look up any regulations for equipment design for Canada.

 

This article from Quality Assurence Magazine has some useful info that may or may not be applicable to Canada:

https://www.qualitya...anitary-design/

 

It also references the guidance documents for the Food Safety Modernization Act.

 

Marshall

[shookimogh]

1. Should be.

2. If you have someone on staff that is familiar with Sanitary Design Principles, that person should be involved. I'm sure you could also get input from the equipment manufacturer or the equipment installer if the supplier is doing the installation.

3. I would look up any regulations for equipment design for Canada.

 

This article from Quality Assurence Magazine has some useful info that may or may not be applicable to Canada:

https://www.qualitya...anitary-design/

 

It also references the guidance documents for the Food Safety Modernization Act.

 

Marshall

Hi Marshall, 

Thanks for your help. Can you also let me know what documents should we ask equipment manufacturer to provide us? is a manual enough to confirm the declarations? and also is there a template to share for a risk based change management ?

 

Thanks,

[mgourley]

Certainly not all inclusive, but some declaration that their equipment conforms to applicable hygienic standards would be helpful.

Definitely get the manuals for operations, maintenance and sanitation.

 

I can't really help with a change management template. That's one of those subjects like "food safety and quality culture" that are so nebulous that it really all depends on your company what needs to be done.

 

Marshall