Jump to content

  • Quick Navigation
Photo

Wearing hats and harinets

Share this

  • You cannot start a new topic
  • Please log in to reply
9 replies to this topic

GrowInTheDark

    Grade - Active

  • IFSQN Active
  • 3 posts
  • 0 thanks
0
Neutral

  • Canada
    Canada

Posted 20 December 2023 - 04:42 PM

Hey folks!

 

When I started at my facility, about 6 months ago, we had a procedure in place for hairnets. 

It was that if you are wearing a hat, you must wear a hairnet under the hat, covering your hair, and then an additional hair net over the hat as well. I have been calling this the "hat sandwich".

 

We are having difficulty with GMPs at our facility, so I am trying to reboot the training, and make a program that is easy for folks to follow, etc.

 

I keep thinking about this hat sandwich situation. Is it necessary? If someone's hairnet can cover both the hat and all of their hair, is this not just a waste of a hairnet? Additionally, employees question why the hat sandwich is required, if the hairnet covers both the hat and the hair. And honestly, I don't really know what to tell them. I've said, "It's a policy that was in place when I arrived here, and I am looking into it currently". Because it makes no sense to me. 

 

Can someone explain this to me like I'm 5? Because I feel like the only reason you should wear an additional hairnet, is if everything is not being covered. That's a given. 

 

I tried to find some validation on it in my predecessor's office, but it's pure chaos in there, which is a gripe for another day haha.

 

Thanks!



MDaleDDF

    Grade - PIFSQN

  • IFSQN Principal
  • 528 posts
  • 209 thanks
406
Excellent

  • United States
    United States
  • Gender:Male

Posted 20 December 2023 - 04:46 PM

My first question would be why are they allowed to wear hats.....

 

Unless the hat is laundered and never leaves the facility like a uniform is, I have no idea why you'd let them wear it in production....


Edited by MDaleDDF, 20 December 2023 - 04:51 PM.


kfromNE

    Grade - FIFSQN

  • IFSQN Fellow
  • 1,071 posts
  • 294 thanks
316
Excellent

  • United States
    United States
  • Gender:Female
  • Interests:Bicycling, reading, nutrition, trivia

Posted 20 December 2023 - 04:48 PM

Too much: 

 

Look at the purpose of each. 

 

The hairnet is required. It keeps hair out of food.

A hat is for either: hardhat and head protection, warmth or style. 

 

As will all clothing - it must be clean to be worn at work.  A common GMP for facilities. 

 

I say no to hairnet over the hat.

 

If you need a hairnet over a hat - that is saying the hat isn't clean. So in violation of your clothing policy. 


Edited by kfromNE, 20 December 2023 - 04:49 PM.


jfrey123

    Grade - PIFSQN

  • IFSQN Principal
  • 636 posts
  • 182 thanks
314
Excellent

  • United States
    United States
  • Gender:Male
  • Location:Sparks, NV

Posted 20 December 2023 - 05:08 PM

I can't see a reason for this hairnet sammich.  They're right, if the top hairnet covers the hat and hair, then the one under it is redundant.

 

But as a topic that has come up frequently on this board, ball caps are almost universally seen as a no-go.  They're filthy, no one ever launders them because they don't want to ruin the shapes, and a buildup of hair and dirt on the hat poses a risk to your production.  Beanies are acceptable as they can be laundered with regular clothing, and arguably required in cold operations from an employee safety standpoint.  I'd opt for providing beanies along with smocks/uniforms if it was my decision in a facility, to ensure they're laundered through the same process as the other food safety clothing.  Hard hats are the only other thing that comes to mind, and in my plants that use them they're cleaned by the sanitation crews each shift and worn atop the hairnets.  No issues from auditors on that.



GrowInTheDark

    Grade - Active

  • IFSQN Active
  • 3 posts
  • 0 thanks
0
Neutral

  • Canada
    Canada

Posted 20 December 2023 - 05:20 PM

I can't see a reason for this hairnet sammich.  They're right, if the top hairnet covers the hat and hair, then the one under it is redundant.

 

But as a topic that has come up frequently on this board, ball caps are almost universally seen as a no-go.  They're filthy, no one ever launders them because they don't want to ruin the shapes, and a buildup of hair and dirt on the hat poses a risk to your production.  Beanies are acceptable as they can be laundered with regular clothing, and arguably required in cold operations from an employee safety standpoint.  I'd opt for providing beanies along with smocks/uniforms if it was my decision in a facility, to ensure they're laundered through the same process as the other food safety clothing.  Hard hats are the only other thing that comes to mind, and in my plants that use them they're cleaned by the sanitation crews each shift and worn atop the hairnets.  No issues from auditors on that.

This is how it's been in every other facility I've been in. This is a mushroom farm, we don't provide uniforms/smocks/etc... We have a rule for clean clothing at work. We have had auditors question hats over hairnets before (at another mushroom farm I was at), so we opted to put them under the hairnet. Maybe I should ban ballcaps, and allow clean beanies, with a hairnet over top. 

I agree, the hat sandwich immediately struck me as overkill, and is almost always going to be disregarded by employees, because it makes no sense. 

 

Our bump caps are cleaned by the night crew, and go over the hairnet. 



SnaxAuditor

    Grade - Active

  • IFSQN Active
  • 14 posts
  • 1 thanks
4
Neutral

  • United States
    United States

Posted 20 December 2023 - 05:21 PM

I guess it depends on your audit scheme and risk. If you're a low risk facility, you could probably get away with allowing hats with a hairnet over the hat. The hairnet under doesn't make any sense, I'd just get 24" hairnets that allow you to cover both. I've worked in a facility that allowed them and one where they didn't allow them, both low risk facilities, and never had an auditor ding us for it. 



SQFconsultant

    SQFconsultant

  • IFSQN Fellow
  • 4,676 posts
  • 1143 thanks
1,133
Excellent

  • United States
    United States
  • Gender:Male
  • Interests:Just when I thought I was out - They pulled me back in!!!

Posted 20 December 2023 - 06:29 PM

I've been in way too many facilities where there was more than just a head contained in a cap to ever say that caps are ok - on top of that they get dirty, pieces of them become loose and drop into the food on the line, etc - the hairnet over the cap is pretty darn funny and has been seen in a number of facilities I've been in.

 

Nothing good will come of this much complication, 1 head, 1 hairnet - no cap that needs another hairnet.

 

easy peasy.


All the Best,

 

All Rights Reserved,

Without Prejudice,

Glenn Oster.

Glenn Oster Consulting, LLC -

SQF System Development | Internal Auditor Training | eConsultant

Martha's Vineyard Island, MA - Restored Republic

http://www.GCEMVI.XYZ

http://www.GlennOster.com

 


Scampi

    Fellow

  • IFSQN Fellow
  • 5,514 posts
  • 1515 thanks
1,561
Excellent

  • Canada
    Canada
  • Gender:Not Telling

Posted 20 December 2023 - 06:39 PM

Hairnet over the cap and you're good to go 

 

Considering that you're in a mushroom farm and not a high risk or manufactured factory


Edited by Scampi, 20 December 2023 - 06:41 PM.

Please stop referring to me as Sir/sirs


Gelato Quality Lead

    Grade - MIFSQN

  • IFSQN Member
  • 137 posts
  • 25 thanks
48
Excellent

  • United States
    United States
  • Gender:Female

Posted 20 December 2023 - 06:54 PM

Hi,

 

We allow beanies to be worn as long as a hairnet can cover the entire thing. Our facility can get pretty cold, as expected for the frozen dessert industry. We see the beanie the same as we would see someone's hair - not necessarily super clean but as long as it is completely covered, we find the risk to be low enough to not have any issues.

 

The only issue comes with new employees who forget to put their hairnet over their beanie, but that is quickly remedied through other employees pestering them about it.


  • G M likes this

G M

    Grade - PIFSQN

  • IFSQN Principal
  • 530 posts
  • 102 thanks
141
Excellent

  • United States
    United States
  • Gender:Male

Posted 20 December 2023 - 07:38 PM

As to the question of why would anyone need to wear a hat in the production environment? Cold temperatures = a snug fitting and generally non-decorative stocking cap seems entirely reasonable.  It needs to meet the same cleanliness and GMP criteria other personal garments are expected to meet, and can be worn under a hairnet like other hair restraint and hearing protection devices.  No sandwich necessary.

 

Unless when you say "hat" you meant a baseball cap, or sombrero or whatever.  I don't see any good reasons to allow this.  If your production environment is so brightly lit people need eye protection, that just seems like an all around waste of time and money -- turn the lighting down, no hats, no extra hairnet layers.

 

If a "hat" is meant as something else like a bump cap or PPE style headgear, this should be made of durable, nonporous, cleanable materials that can be outside the hairnet.





Share this


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users