4 replies to this topic

[leigh]

Hi, I have had a slight issue with High TVC and High coliforms in the sites water and its hit and miss where it is positive, please could you let me know how I can solve this, I have had the system flushed but I am still getting sporadic high out of spec results. thanks

[Scampi]

My best guess is there are filters / mesh screens somewhere in the system. You would need to disassemble , clean or replace them reassemble, flush and test again

 

 

Did you test the main line coming into the facility???

[leigh]

Hi, Yes the water incoming has passed, I have been told as we use the local authorities water we do not have to use any sieve or filters, thanks

[Dorothy87]

Hi

 

The most common issue is the little sieve under the tap. Unscrew the sieve, remove lime scale, clean and sanitize. 

 

Check your schematic plan for dead legs, often sinks, and water pipes have a dead leg with stagnant water. Engineers team should be able to help. 

 

Recently I had issues with water fountain, filters been not replaced since 2016 

 

 

 

Attached Files

•  Water issues.pdf   121.3KB   13 downloads

[leigh]

Thanks for coming back I am going to take a look at all the taps tomorrow then speak tot he engineers, we have a lot of Hygiene pipes that are very rarely used so this could be the issue even though they get flushed out every weekend.

 

Ill come back with an update