Jump to content

  • Quick Navigation
Photo

Risk Analysis for wearing shorts in production floor

Share this

  • You cannot start a new topic
  • Please log in to reply
19 replies to this topic

Padfoot

    Grade - MIFSQN

  • IFSQN Member
  • 97 posts
  • 6 thanks
14
Good

  • United States
    United States
  • Gender:Male
  • Location:Dallas, TX

Posted 19 May 2020 - 04:17 PM

Hello everyone,

Can someone please give me some guidance on a topic that has been in question for a while in my plant.

With summer approaching we have been talking about allowing employees to wear shorts (2 inches above the knee in the production floor, the summers here can reach over 100 degrees.

We wear smocks in the production floor and we have no product flow lower than an employees waist line. 

We also have a kill step (Baking). I'm confident our product will not be at risk but what your thoughts? Also can someone help me on creating a risk analysis for this.

 

Thank you! 



SQFconsultant

    SQFconsultant

  • IFSQN Fellow
  • 4,632 posts
  • 1135 thanks
1,126
Excellent

  • United States
    United States
  • Gender:Male
  • Interests:Just when I thought I was out - They pulled me back in!!!

Posted 19 May 2020 - 05:32 PM

I understand the arguments for it, the temperatures etc, however (bad news part)...

 

have never seen an Auditor accept shorts in a production area, regardless of height of product. temperature or risk analysis.

 

I have seen Auditors accept shorts in non-production area that did not have exposed product.

 

Will say that I have seen Auditors that see folks in shorts in production not only write up the shorts but also ventilation issues as shorts are an immediate red flag to other issues.

 

In our planned southern building we have a mostly metal building and will have 3 cargo doors that will be left open for venting - all have pull down fine mesh (not even "no see" nor bird mites can get thru) gel bottom and siders on them for a good seal, but they will allow ample air flow.

 

You may want to take a look into linen slacks/pants loose weave, very comfortable, allowing good air flow and just fine with auditors too.


All the Best,

 

All Rights Reserved,

Without Prejudice,

Glenn Oster.

Glenn Oster Consulting, LLC -

SQF System Development | Internal Auditor Training | eConsultant

Martha's Vineyard Island, MA - Restored Republic

http://www.GCEMVI.XYZ

http://www.GlennOster.com

 


Thanked by 1 Member:

olenazh

    Grade - FIFSQN

  • IFSQN Fellow
  • 1,363 posts
  • 439 thanks
432
Excellent

  • Canada
    Canada
  • Gender:Female
  • Location:Toronto
  • Interests:My job, church, reading, gym, horror movies

Posted 19 May 2020 - 06:46 PM

I understand the arguments for it, the temperatures etc, however (bad news part)...

 

have never seen an Auditor accept shorts in a production area, regardless of height of product. temperature or risk analysis.

 

I have seen Auditors accept shorts in non-production area that did not have exposed product.

 

Will say that I have seen Auditors that see folks in shorts in production not only write up the shorts but also ventilation issues as shorts are an immediate red flag to other issues.

 

In our planned southern building we have a mostly metal building and will have 3 cargo doors that will be left open for venting - all have pull down fine mesh (not even "no see" nor bird mites can get thru) gel bottom and siders on them for a good seal, but they will allow ample air flow.

 

You may want to take a look into linen slacks/pants loose weave, very comfortable, allowing good air flow and just fine with auditors too.

Glenn, could you please, as an expert, explain why they're not allowed? Because of potential risk of fallen hair from exposed hairy legs? If so - why do the auditors accept short/rolled sleeves? The risk is higher. Or they see other threats? Thanks a lot in advance!



Padfoot

    Grade - MIFSQN

  • IFSQN Member
  • 97 posts
  • 6 thanks
14
Good

  • United States
    United States
  • Gender:Male
  • Location:Dallas, TX

Posted 19 May 2020 - 06:50 PM

Glenn, could you please, as an expert, explain why they're not allowed? Because of potential risk of fallen hair from exposed hairy legs? If so - why do the auditors accept short/rolled sleeves? The risk is higher. Or they see other threats? Thanks a lot in advance!

I wasn't really taking leg hair as a risk since like you said the arm hair is not a risk or eyebrows. I Think the risk is the open skin by the product would be the focus since no one would wash their legs like they do hands and arms. Am i correct Glenn? 



olenazh

    Grade - FIFSQN

  • IFSQN Fellow
  • 1,363 posts
  • 439 thanks
432
Excellent

  • Canada
    Canada
  • Gender:Female
  • Location:Toronto
  • Interests:My job, church, reading, gym, horror movies

Posted 19 May 2020 - 06:57 PM

I wasn't really taking leg hair as a risk since like you said the arm hair is not a risk or eyebrows. I Think the risk is the open skin by the product would be the focus since no one would wash their legs like they do hands and arms. Am i correct Glenn? 

Alemv15, as I see from the topic the legs're covered with the smocks, first, they're not touching the products, second, and finally if open skin would be a threat, how about a face?



Thanked by 1 Member:

Padfoot

    Grade - MIFSQN

  • IFSQN Member
  • 97 posts
  • 6 thanks
14
Good

  • United States
    United States
  • Gender:Male
  • Location:Dallas, TX

Posted 19 May 2020 - 07:26 PM

Alemv15, as I see from the topic the legs're covered with the smocks, first, they're not touching the products, second, and finally if open skin would be a threat, how about a face?

Yes, that is how we have discussed it 



Charles.C

    Grade - FIFSQN

  • IFSQN Moderator
  • 20,542 posts
  • 5662 thanks
1,544
Excellent

  • Earth
    Earth
  • Gender:Male
  • Interests:SF
    TV
    Movies

Posted 20 May 2020 - 05:38 AM

I suppose there might be  an increased GMP risk due "Commando". :closedeyes:


Kind Regards,

 

Charles.C


Thanked by 1 Member:

MsMars

    Grade - PIFSQN

  • IFSQN Principal
  • 606 posts
  • 194 thanks
151
Excellent

  • United States
    United States
  • Gender:Female

Posted 20 May 2020 - 02:08 PM

I suppose there might be  an increased GMP risk due "Commando". :closedeyes:

 

Charles, you made me chuckle.  :giggle:



MsMars

    Grade - PIFSQN

  • IFSQN Principal
  • 606 posts
  • 194 thanks
151
Excellent

  • United States
    United States
  • Gender:Female

Posted 20 May 2020 - 02:12 PM

Alemv15, as I see from the topic the legs're covered with the smocks, first, they're not touching the products, second, and finally if open skin would be a threat, how about a face?

 

I've always seen it as more of a safety risk than anything.  But, as many have said before me (see below threads, or simply do a forum search for "shorts"), it's best to do your own risk assessment to back up whatever decision you make. 

 

https://www.ifsqn.co...roduction-room/

https://www.ifsqn.co...ex-environment/



Thanked by 2 Members:

FurFarmandFork

    Food Safety Consultant, Production Supervisor

  • IFSQN Fellow
  • 1,264 posts
  • 590 thanks
206
Excellent

  • United States
    United States
  • Gender:Male
  • Location:Oregon, USA

Posted 20 May 2020 - 07:22 PM

Risk assessment. I've had SQF facilities that allowed shorts. Your discussions over comparble risk to arm hair etc. are on the right track. It all depends on the position of the operators to the exposed product contact surfaces and the risk level of the product itself.


Austin Bouck
Owner/Consultant at Fur, Farm, and Fork.
Consulting for companies needing effective, lean food safety systems and solutions.

Subscribe to the blog at furfarmandfork.com for food safety research, insights, and analysis.

Thanked by 1 Member:

Ian R

    Grade - MIFSQN

  • IFSQN Member
  • 121 posts
  • 40 thanks
14
Good

Posted 20 May 2020 - 08:08 PM

Hi

Can you wear a skirt?

What about pirate trousers?

How long does the garment need to be to satisfy an auditor?

 

As mentioned what is the food safety risk if they are wearing a coat/smock that covers down to the knees?

 

The only time I have insisted on full leg covering is where the product is at risk or the employee needs protection (H&S)

 

rgds

 

 

 

 



Thanked by 1 Member:

mgourley

    Grade - FIFSQN

  • IFSQN Fellow
  • 1,403 posts
  • 997 thanks
274
Excellent

  • United States
    United States
  • Gender:Male
  • Location:Plant City, FL
  • Interests:Cooking, golf, firearms, food safety and sanitation.

Posted 20 May 2020 - 10:50 PM

I have always been in the camp that wonders why you have to wear a hair/beard net, but do not have to wear a sleeve over arm hair, if both are above product zones.
Been there done that in hot environments where product is well above the waist level. 

Perhaps a simple lightweight disposable apron?

 

Marshall



Thanked by 1 Member:

Charles.C

    Grade - FIFSQN

  • IFSQN Moderator
  • 20,542 posts
  • 5662 thanks
1,544
Excellent

  • Earth
    Earth
  • Gender:Male
  • Interests:SF
    TV
    Movies

Posted 21 May 2020 - 08:33 AM

Hi

Can you wear a skirt?

What about pirate trousers?

How long does the garment need to be to satisfy an auditor?

 

As mentioned what is the food safety risk if they are wearing a coat/smock that covers down to the knees?

 

The only time I have insisted on full leg covering is where the product is at risk or the employee needs protection (H&S)

 

rgds

 

^^^^^^

Yes, but not Tartan.

@ alemv, (apologies for diversions however I have no idea what a smock is, sounds Victorian).


Kind Regards,

 

Charles.C


olenazh

    Grade - FIFSQN

  • IFSQN Fellow
  • 1,363 posts
  • 439 thanks
432
Excellent

  • Canada
    Canada
  • Gender:Female
  • Location:Toronto
  • Interests:My job, church, reading, gym, horror movies

Posted 21 May 2020 - 12:34 PM

Regarding wearing skirts: I was told about a lady insisting on wearing a skirt in bakery production due to religious matter. The company owner bought it and took the consequences: that lady fell down of the ladder because her skirt was pinched into the stairs. Scary but educative...



Thanked by 1 Member:

Padfoot

    Grade - MIFSQN

  • IFSQN Member
  • 97 posts
  • 6 thanks
14
Good

  • United States
    United States
  • Gender:Male
  • Location:Dallas, TX

Posted 21 May 2020 - 02:08 PM

^^^^^^

Yes, but not Tartan.

@ alemv, (apologies for diversions however I have no idea what a smock is, sounds Victorian).

Hahahaha I'm not sure what you guys call it.

https://www.amazon.c...e/dp/B00S1IW1EG



The Food Scientist

    Grade - FIFSQN

  • IFSQN Fellow
  • 1,057 posts
  • 268 thanks
208
Excellent

  • United States
    United States
  • Gender:Female
  • Interests:Food Science, Nature, SQF, Learning, Trying out new foods, Sarcasm.

Posted 21 May 2020 - 02:45 PM

Like everyone said, Risk Assessment.

 

I worked at an SQF facility and they allowed shorts. It was a RTE snack food plant.

 

Auditors never had a problem with it.

 

It is more of a employee safety.


Everything in food is science. The only subjective part is when you eat it. - Alton Brown.


Thanked by 1 Member:

The Food Scientist

    Grade - FIFSQN

  • IFSQN Fellow
  • 1,057 posts
  • 268 thanks
208
Excellent

  • United States
    United States
  • Gender:Female
  • Interests:Food Science, Nature, SQF, Learning, Trying out new foods, Sarcasm.

Posted 21 May 2020 - 02:47 PM

Regarding wearing skirts: I was told about a lady insisting on wearing a skirt in bakery production due to religious matter. The company owner bought it and took the consequences: that lady fell down of the ladder because her skirt was pinched into the stairs. Scary but educative...

 

Skirts are a big NO.

 

Even clothes that have fringes or anything hanging from them pose the same risk! They get caught up in the machines as well. 


Everything in food is science. The only subjective part is when you eat it. - Alton Brown.


Thanked by 1 Member:

Padfoot

    Grade - MIFSQN

  • IFSQN Member
  • 97 posts
  • 6 thanks
14
Good

  • United States
    United States
  • Gender:Male
  • Location:Dallas, TX

Posted 21 May 2020 - 02:48 PM

Thank you everyone! this has been very helpful 



Fishlady

    Grade - MIFSQN

  • IFSQN Member
  • 210 posts
  • 54 thanks
26
Excellent

  • United States
    United States
  • Gender:Female

Posted 21 May 2020 - 09:37 PM

I have been in several BRC certificated plants in tropical countries where the standard issue uniform is cotton knee-length shorts and gum boots. The employees usually also wear an apron, which is at least as long as the shorts. Only a little bit above and below the knees is exposed. Then again, these plants were producing canned goods, so perhaps the retorting process allows a little more leeway (risk assessment)?



Richaney Impraseuth

    Grade - AIFSQN

  • IFSQN Associate
  • 37 posts
  • 4 thanks
9
Neutral

  • United States
    United States
  • Gender:Female
  • Location:Atlanta, GA

Posted 29 April 2021 - 07:23 PM

Our company is SQF certified and we all wear shorts. it has never been an issue.





Share this


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users