Jump to content

  • Quick Navigation
Photo

Microbiological criteria for dried plant based powders

Share this

  • You cannot start a new topic
  • Please log in to reply
6 replies to this topic

HelenW

    Grade - Active

  • Newbie
  • 11 posts
  • 0 thanks
1
Neutral

  • United Kingdom
    United Kingdom
  • Gender:Female
  • Location:Bristol, UK

Posted 28 May 2021 - 07:57 AM

HI, I'm trying to set our microbiological critera for our finished products, however I'm not really sure where to begin. We have currently got targets in place as follows (I've inherited and don't know where they came from or whether they are correct!) APC - No limit established Yeast/Mould - <1000cfu/g E.Coli - <10cfu/g Salmonella - Neg/25Our products are all vegan, plant based protein and dietary supplements, that are dried powders and added to water/non-dairy milk when used. Can anyone help with whether these limits are acceptable and where I can find a reference doc to say so? We're gearing up for BRC audit and I'm really not comfortable in this area. We've also seen products failing (randomly - no trends either on site or in other production batches), with mould counts @ 2000/3000 cfu/g. Thanks!  



aeb11

    Grade - Active

  • IFSQN Active
  • 7 posts
  • 1 thanks
1
Neutral

  • United Kingdom
    United Kingdom

Posted 28 May 2021 - 10:43 AM

Hi Helen,

 

I work in the same industry.

 

We set our Finished Product limits as follows

 

Containing botanicals 100 000 TVC Bacteria, 10 000 Yeasts and moulds

Not containing botanicals 10 000 TVC Bacteria, 1000 Yeasts and moulds

Salmonella neg in 25g

E coli neg in 1g

 

It is difficult as there aren't limits specifically for food supplements but this is pretty standard

 

When it comes to raw materials our acceptance criteria is containing botanicals 10 000 TVC Bacteria and 1000 Yeasts and Moulds, non botanicals 1000 TVC Bacteria and 100 Yeasts and Moulds. Salmonella and E.Coli are the same as for a Finished Product

 

We use the European Pharmacopoeia to help us and again, also quite standard across the industry.

 

Some materials and finished products will fall outside of this and you will sometimes have to assess some individually.

 

Hope this helps

 

Amy 



Thanked by 1 Member:

HelenW

    Grade - Active

  • Newbie
  • 11 posts
  • 0 thanks
1
Neutral

  • United Kingdom
    United Kingdom
  • Gender:Female
  • Location:Bristol, UK

Posted 28 May 2021 - 02:48 PM

Hi Helen,

 

I work in the same industry.

 

We set our Finished Product limits as follows

 

Containing botanicals 100 000 TVC Bacteria, 10 000 Yeasts and moulds

Not containing botanicals 10 000 TVC Bacteria, 1000 Yeasts and moulds

Salmonella neg in 25g

E coli neg in 1g

 

It is difficult as there aren't limits specifically for food supplements but this is pretty standard

 

When it comes to raw materials our acceptance criteria is containing botanicals 10 000 TVC Bacteria and 1000 Yeasts and Moulds, non botanicals 1000 TVC Bacteria and 100 Yeasts and Moulds. Salmonella and E.Coli are the same as for a Finished Product

 

We use the European Pharmacopoeia to help us and again, also quite standard across the industry.

 

Some materials and finished products will fall outside of this and you will sometimes have to assess some individually.

 

Hope this helps

 

Amy 

 

Amy - thank you so much for your reply, this will definitely help, and also explains some of the oddities that we've been seeing. 



Charles.C

    Grade - FIFSQN

  • IFSQN Moderator
  • 20,542 posts
  • 5662 thanks
1,544
Excellent

  • Earth
    Earth
  • Gender:Male
  • Interests:SF
    TV
    Movies

Posted 29 May 2021 - 01:10 AM

HI, I'm trying to set our microbiological critera for our finished products, however I'm not really sure where to begin. We have currently got targets in place as follows (I've inherited and don't know where they came from or whether they are correct!) APC - No limit established Yeast/Mould - <1000cfu/g E.Coli - <10cfu/g Salmonella - Neg/25Our products are all vegan, plant based protein and dietary supplements, that are dried powders and added to water/non-dairy milk when used. Can anyone help with whether these limits are acceptable and where I can find a reference doc to say so? We're gearing up for BRC audit and I'm really not comfortable in this area. We've also seen products failing (randomly - no trends either on site or in other production batches), with mould counts @ 2000/3000 cfu/g. Thanks!  

 

Hi Helen,

 

Are these products classified as RTE ?

 

Not my product area of expertise but there does appear to be significant coverage of the micro. aspects on IT as illustrated in Post 2.

 

I enclose 2 refs (2015, 2020)  which both substantially focus on herbal ingredients. The first ref contains suggested limits which sort of parallel those in Post 2.

 

Attached File  microbiological quality of food supplements.pdf   103.4KB   53 downloads

Attached File  Micro.Quality of Dietary supplements using Plant-derived Ingredients.pdf   350.75KB   51 downloads

 

Compliance of data with limits in 1st ref looks "fair" (ie 1-5 % defect rates) however the literature reviewed data in 2nd ref shows considerable variations  and much higher defect values.

 

added - One more set (2012) of comparative recommended limits from various organisations (USP, WHO. AHPA etc) Not surprisingly there are considerable variations.

 

Attached File  AHPA micro limits botanical ingredients.pdf   171.44KB   47 downloads


Edited by Charles.C, 29 May 2021 - 01:29 AM.
edited

Kind Regards,

 

Charles.C


HelenW

    Grade - Active

  • Newbie
  • 11 posts
  • 0 thanks
1
Neutral

  • United Kingdom
    United Kingdom
  • Gender:Female
  • Location:Bristol, UK

Posted 01 June 2021 - 07:21 AM

Hi Helen,

 

Are these products classified as RTE ?

 

Not my product area of expertise but there does appear to be significant coverage of the micro. aspects on IT as illustrated in Post 2.

 

I enclose 2 refs (2015, 2020)  which both substantially focus on herbal ingredients. The first ref contains suggested limits which sort of parallel those in Post 2.

 

attachicon.gif microbiological quality of food supplements.pdf

attachicon.gif Micro.Quality of Dietary supplements using Plant-derived Ingredients.pdf

 

Compliance of data with limits in 1st ref looks "fair" (ie 1-5 % defect rates) however the literature reviewed data in 2nd ref shows considerable variations  and much higher defect values.

 

added - One more set (2012) of comparative recommended limits from various organisations (USP, WHO. AHPA etc) Not surprisingly there are considerable variations.

 

attachicon.gif AHPA micro limits botanical ingredients.pdf

 

Hi Charles,

Thanks for the information - I will have a read through of these properly but on a brief scan, this would look like our products sit within the ranges specified. 

 

Yes, the products are classed as RTE - on site, there is no heat treatment or processing, all powders are bought ready to use, we blend and pack only. 



Charles.C

    Grade - FIFSQN

  • IFSQN Moderator
  • 20,542 posts
  • 5662 thanks
1,544
Excellent

  • Earth
    Earth
  • Gender:Male
  • Interests:SF
    TV
    Movies

Posted 01 June 2021 - 09:13 AM

Hi Charles,

Thanks for the information - I will have a read through of these properly but on a brief scan, this would look like our products sit within the ranges specified. 

 

Yes, the products are classed as RTE - on site, there is no heat treatment or processing, all powders are bought ready to use, we blend and pack only. 

 

Hi Helen,

 

The "official"  micro. expectations are unsurprisingly sensitive to the degree and type of processing applied.

 

Not obvious as to the variations in history of the data reported in 2nd pdf but the variety of .microbial characteristics/contaminants detected suggests probably considerable. Makes setting specifications problematic.

 

Maybe should initially focus on the safety related aspects.

 

As noted, your data looks quite promising assuming validated analytical procedures in use.

 

PS -  I would have thought that some screening for specific levels of  mould  to be of interest from a FS POV.


Kind Regards,

 

Charles.C


Zargham Abbas

    Grade - AIFSQN

  • IFSQN Associate
  • 40 posts
  • 6 thanks
2
Neutral

  • Pakistan
    Pakistan
  • Gender:Male
  • Location:Multan- Pakistan
  • Interests:Food Safety, Food Microbiology, Certifications, Quality Management, HACCP, Pest Management, Allergens Handling and Management, Meat Processing, Bakery and Confectionary.

Posted 25 October 2021 - 04:50 AM

Posted A minute ago

Hi,

Before setting the limits and focusing on raw materials results, i will suggest to do microbiological risk assessment of your finished product that will strengthen your logica of setting the acceptable limits . sort the sources of microbial contamination and take actions to control these sources. 

 

your mentioned limits are ok and are within safe range. in my openion also include coliform / enterobacteriaceae in your testing parameters and set the limit as <10 cfu/g.

 

 

Thanks & Regards,

Zargham Abbas

Food Microbiologist

zarghama1@gmail.com.

 

Halal, ISO & Food Safety Consultant




Share this


Also tagged with one or more of these keywords: Micro, yeast, mould, testing, plantbased, vegan, powders

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users