Jump to content

  • Quick Navigation
Photo

Commercial sterility of low acids

Share this

  • You cannot start a new topic
  • Please log in to reply
2 replies to this topic
- - - - -

kngarcia

    Grade - Active

  • IFSQN Active
  • 2 posts
  • 0 thanks
0
Neutral

  • Philippines
    Philippines

Posted 11 June 2010 - 02:00 AM

Hi everyone :)

For hermetically sealed low acid products eg. sauces processed at temps higher than 115C for 30 mins, is it safe to just test it for thermophile sporeformers? since thermophilic spores are more robust and able to withstand higher temps, it can be said that its absence would also mean negative for mesophilic sporeformers. just want a clarification since BAM states that both meso and thermophiles should be tested for commercial sterility of these particular products.

Thanks in advance



Tony-C

    Grade - FIFSQN

  • IFSQN Fellow
  • 4,248 posts
  • 1298 thanks
619
Excellent

  • United Kingdom
    United Kingdom
  • Gender:Male
  • Location:World
  • Interests:My main interests are sports particularly football, pool, scuba diving, skiing and ten pin bowling.

Posted 11 June 2010 - 04:46 AM

Hi everyone :)

For hermetically sealed low acid products eg. sauces processed at temps higher than 115C for 30 mins, is it safe to just test it for thermophile sporeformers? since thermophilic spores are more robust and able to withstand higher temps, it can be said that its absence would also mean negative for mesophilic sporeformers. just want a clarification since BAM states that both meso and thermophiles should be tested for commercial sterility of these particular products.

Thanks in advance


Hi there

With these sorts of products you may have dormant thermoduric organisms that have survived the process and may or may not grow. Mesophiles are normally destroyed by the process.

What you need to do is:
1. Assess if thermophiles and mesophiles are present
2. Assess if they are likely to grow in the product

Then you will be able to judge if the product is suitable for release.

Kind regards,

Tony


kngarcia

    Grade - Active

  • IFSQN Active
  • 2 posts
  • 0 thanks
0
Neutral

  • Philippines
    Philippines

Posted 12 June 2010 - 06:33 AM

Hi there

With these sorts of products you may have dormant thermoduric organisms that have survived the process and may or may not grow. Mesophiles are normally destroyed by the process.

What you need to do is:
1. Assess if thermophiles and mesophiles are present
2. Assess if they are likely to grow in the product

Then you will be able to judge if the product is suitable for release.

Kind regards,

Tony



thanks tony :) will take note of that




Share this

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users