6 replies to this topic

[NorCalNate]

I completed my annual chemical inventory and there was a significant lapse in Policy resulting in a majority of chemicals not being on the chemical registrar or having an SDS. 

 

I've downloaded all the SDS that I need. If possible I'd prefer to avoid printing each SDS, was wondering if it would be acceptable to only have digital SDS files instead of printed ones? 

[PrplomSolved]

I completed my annual chemical inventory and there was a significant lapse in Policy resulting in a majority of chemicals not being on the chemical registrar or having an SDS. 

 

I've downloaded all the SDS that I need. If possible I'd prefer to avoid printing each SDS, was wondering if it would be acceptable to only have digital SDS files instead of printed ones? 

 

 

I think a more appropriate question is whether the SDS's would remain accessible from anywhere on-site in the event of power-outage, server failure, or other technology disruption. From an audit perspective, the primary concern with a fully digital system would be the existence of a documented and effective backup plan to ensure continued access for all.

[SQFconsultant]

If I'd a worker down on the floor at the location of use/storage will I know how to readily get to this information?  

 

We use both a screen with pics of each item - push the photo and get the sheet and also have the sheets in laminated sheet format at each location of storage/mixture and same system stores digital copies.

[Tony-C]

Hi NorCalNate,

 

As Austin has indicated this is more a health and safety issue than food safety.

 

I had a delivery of a caustic tanker once where the hose split and the guy unloading got sprayed. That SDS information etc, available first aiders and the location of an emergency shower were very important.

 

So, as Glenn has posted I would want laminated copies (of any information related to action required following accidents, other emergencies and spillages) available at point of use, acceptance and storage.

 

Kind regards,

 

Tony

[GMO]

One thing I often find is people forget to get the Technical Data sheets and only get the MSDS. The Technical Data sheets give you more information about the dilution, testing methods, suitability for different materials and absence of allergens (i.e. technical information). The material safety data sheets give safety information. Sometimes they're combined but not often I find at least over here.

 

I'm not necessarily of the opinion that printed is more easy to locate in an accident scenario and printed is more likely to be waylaid or out of date. One thing which might help is to have essential safety data at storage points and perhaps a QR code to where they're stored. Certainly only having hard copies or only electronic copies can both cause issues.

Also just out of habit and, I think, good practice, I will always have hard copies of things like this, factory plans etc at a gatehouse and in one other place on site in case of crisis situations where electricity or internet is put out of action.

[jfrey123]

One thing I often find is people forget to get the Technical Data sheets and only get the MSDS.

 

Stateside all of the chemical suppliers were required to drop the MSDS moniker and now provide SDS which provide the level of detail you're describing.  One of my first hits early in my career was having a MSDS binder still out on the floor after the regulations had changed to the SDS standard, and everything in it labeled MSDS was obviously out of date.

 

To OP's question, piling on for everyone else's reply, you'll want physical copies available for regular and emergency use.  Every one of your employees handling chemicals needs to have access to these, and it's not likely each of those employees has access to your digital storage spaces.

[GMO]

Apologies, MSDS is still used in the UK.

 

Just make sure those physical copies don't get out of date. I don't think I've done an audit yet where I've not found an issue with them.